Modeling of High-Porosity Copper-Based Mixtures under Shock Loading
- Authors: Maevskii K.K.1, Kinelovskii S.A.1
-
Affiliations:
- Lavrentyev Institute of Hydrodynamics, Siberian Branch
- Issue: Vol 60, No 4 (2019)
- Pages: 612-619
- Section: Article
- URL: https://journals.rcsi.science/0021-8944/article/view/161588
- DOI: https://doi.org/10.1134/S0021894419040035
- ID: 161588
Cite item
Abstract
A thermodynamically equilibrium model is applied for simulating thermodynamic parameters of shock loading of both pure materials and mixtures of homogeneous and porous materials. The model includes a modified equation of state, which has only one fitting parameter determined on the basis of experimental data. The thermodynamic parameters of shock loading of copper and copper-based mixtures with porosities of 1–10 at pressures above 5 GPa are calculated. The results of these calculations are compared to available experimental data (Hugoniot adiabats, double compression by shock waves, and temperature estimates). The possibility of modeling the compression of the mixture as a whole and each component separately is demonstrated.
About the authors
K. K. Maevskii
Lavrentyev Institute of Hydrodynamics, Siberian Branch
Author for correspondence.
Email: konstantinm@hydro.nsc.ru
Russian Federation, Novosibirsk, 630090
S. A. Kinelovskii
Lavrentyev Institute of Hydrodynamics, Siberian Branch
Email: konstantinm@hydro.nsc.ru
Russian Federation, Novosibirsk, 630090