An Automated Setup for Depositing Sensitive Coatings on the Surfaces of Solid-State Sensors
- Авторлар: Maslennikov A.V.1, Zubkov I.L.1
-
Мекемелер:
- Alekseev Nizhny Novgorod State Technical University
- Шығарылым: Том 61, № 5 (2018)
- Беттер: 753-756
- Бөлім: Laboratory Techniques
- URL: https://journals.rcsi.science/0020-4412/article/view/160426
- DOI: https://doi.org/10.1134/S002044121805010X
- ID: 160426
Дәйексөз келтіру
Аннотация
The design of an automated setup for depositing functional polymers on the surfaces of gas-sensitive solid-state sensors is described. It is based on the irrigation method, which is the most effective technique. The results of experiments on the deposition of films of functional polymers on the surface of a sensor on surface acoustic waves with an operating frequency of 170 MHz are presented. It is shown that the use of the developed equipment makes it possible to reduce the spread of the characteristics of the obtained sensors, in particular, in the initial mass load from 9.9 to 2.8%, and also to improve the static and dynamic characteristics of the sensors.
Авторлар туралы
A. Maslennikov
Alekseev Nizhny Novgorod State Technical University
Хат алмасуға жауапты Автор.
Email: mavdoc@rambler.ru
Ресей, Nizhny Novgorod, 603950
I. Zubkov
Alekseev Nizhny Novgorod State Technical University
Email: mavdoc@rambler.ru
Ресей, Nizhny Novgorod, 603950
Қосымша файлдар
