An automatic apparatus for the preparation of thin films by successive ionic layer deposition
- 作者: Andronov A.O.1, Matyushkin L.B.1, Khondryukov D.V.1, Aleksandrova A.O.1, Moshnikov V.A.1
-
隶属关系:
- Ulyanov (Lenin) State Electrical Engineering University LETI
- 期: 卷 60, 编号 6 (2017)
- 页面: 888-891
- 栏目: Laboratory Techniques
- URL: https://journals.rcsi.science/0020-4412/article/view/160005
- DOI: https://doi.org/10.1134/S0020441217050141
- ID: 160005
如何引用文章
详细
An automatic apparatus for the preparation of thin-film coatings by successive ionic layer deposition is presented. The basic design, engineering, and operating parameters of the apparatus are the specimenpositioning accuracy with respect to the phase boundaries of 10 μm, a substrate speed in the solution of 0.5–3 mm/s, and a temperature range of 25–90°C. The apparatus was tested in the course of preparation of cadmium sulfide thin films from aqueous–alcohol solutions. The resulting specimens had a dense homogeneous surface, a thickness of 1.3–25.5 nm, depending on the number of the layer-deposition cycles, and an energy gap width of 2.3–2.5 eV.
作者简介
A. Andronov
Ulyanov (Lenin) State Electrical Engineering University LETI
编辑信件的主要联系方式.
Email: andrey.andronov92@gmail.com
俄罗斯联邦, ul. Professora Popova 5, St. Petersburg, 197376
L. Matyushkin
Ulyanov (Lenin) State Electrical Engineering University LETI
Email: andrey.andronov92@gmail.com
俄罗斯联邦, ul. Professora Popova 5, St. Petersburg, 197376
D. Khondryukov
Ulyanov (Lenin) State Electrical Engineering University LETI
Email: andrey.andronov92@gmail.com
俄罗斯联邦, ul. Professora Popova 5, St. Petersburg, 197376
A. Aleksandrova
Ulyanov (Lenin) State Electrical Engineering University LETI
Email: andrey.andronov92@gmail.com
俄罗斯联邦, ul. Professora Popova 5, St. Petersburg, 197376
V. Moshnikov
Ulyanov (Lenin) State Electrical Engineering University LETI
Email: andrey.andronov92@gmail.com
俄罗斯联邦, ul. Professora Popova 5, St. Petersburg, 197376
补充文件
