A beam-position monitor system at the VEPP-4M electron−positron collider


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

The VEPP-4M storage ring has been designed for experiments with colliding electron−positron beams, a synchrotron radiation beam, and extracted γ-ray beams at energies of 1−5 GeV. A correct equilibrium beam orbit must be kept in the storage ring to maintain the required experimental conditions. A beam position monitor system is used for this purpose. It includes 54 beam position monitors, monitor signal-processing modules, and synch signals distributors. In 2013–2016, new signal processing modules with a high time resolution were developed and installed at the VEPP-4M storage ring. These have two main advantages over the old modules. First, the new modules allow separate position measurements of electron and positron bunches at an interval between the bunch signals as long as 18 ns. Second, they are able to perform fullfledged turn-by-turn beam position measurements, which is very important for adjustment of the storagering parameters. Turn-by-turn beam position measurements can be performed during injection of a new beam, beam kicking, beam loss, or at an arbitrary instant of time. The structures and main features of the new modules are described, the measurement accuracy is analyzed, and some results of their operation at the storage ring are presented.

作者简介

E. Bekhtenev

Budker Institute of Nuclear Physics, Siberian Branch

编辑信件的主要联系方式.
Email: E.A.Bekhtenev@inp.nsk.su
俄罗斯联邦, Novosibirsk, 630090

G. Karpov

Budker Institute of Nuclear Physics, Siberian Branch

Email: E.A.Bekhtenev@inp.nsk.su
俄罗斯联邦, Novosibirsk, 630090

P. Piminov

Budker Institute of Nuclear Physics, Siberian Branch

Email: E.A.Bekhtenev@inp.nsk.su
俄罗斯联邦, Novosibirsk, 630090

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Inc., 2017