A trigger generator for controlling a high-current triggered vacuum switch
- 作者: Alferov D.F.1, Krastelev E.G.2, Maslennikov S.P.3
-
隶属关系:
- All-Russia Electrotechnical Institute
- Joint Institute for High Temperatures
- National Research Nuclear University Moscow Engineering Physics Institute (MEPhI)
- 期: 卷 59, 编号 2 (2016)
- 页面: 239-244
- 栏目: Electronics and Radio Engineering
- URL: https://journals.rcsi.science/0020-4412/article/view/158948
- DOI: https://doi.org/10.1134/S0020441216020020
- ID: 158948
如何引用文章
详细
A trigger generator (TG) with a discharge of a storage capacitor through the trigger gap of a triggered vacuum switch (TVS) was developed. It provides a voltage amplitude of up to 7 kV across the trigger gap. After a gap breakdown, the TG provides an ignition current in the form of a damped sinusoid with an amplitude of ≥1 kA. It differs from analogous devices by pulsed charging of the storage capacitor and the use of an output self-breakdown gas-filled switch. The developed design of the gas switch with gas preionization in the spark gap by an additional corona discharge provides high stability of both the pulsed-breakdown voltage and the switching-on time. The TG tests showed reliable and stable switching-on of high-current TVSs of different modifications with a discharge-current rise rate of up to 3 × 1010 А/s.
作者简介
D. Alferov
All-Russia Electrotechnical Institute
Email: ekrastelev@yandex.ru
俄罗斯联邦, Krasnokazarmennaya ul. 12, Moscow, 111250
E. Krastelev
Joint Institute for High Temperatures
编辑信件的主要联系方式.
Email: ekrastelev@yandex.ru
俄罗斯联邦, ul. Izhorskaya 13, str. 2, Moscow, 125412
S. Maslennikov
National Research Nuclear University Moscow Engineering Physics Institute (MEPhI)
Email: ekrastelev@yandex.ru
俄罗斯联邦, Kashirskoe sh. 31, Moscow, 115409
补充文件
