Preparation of nanoporous titanium oxide films by electrochemical anodic oxidation


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

We have investigated the conditions of the formation of tubular layers of nanoporous TiO2 (NPTO) by the anodic oxidation of Ti in a 1% ammonium fluoride solution in ethylene glycol. The results demonstrate that increasing the anode current density and anodization time increases the nanotube diameter. A model has been proposed for the formation of tubular NPTO layers. The model builds on the concept of anisotropic Ti etching. The rate of the formation of the tubular structure of TiO2 has been shown to be limited by the oxide film growth rate under the conditions of this study.

Sobre autores

V. Nebol’sin

Voronezh State Technical University

Autor responsável pela correspondência
Email: vcmsao13@mail.ru
Rússia, Moskovskii pr. 26, Voronezh, 394026

B. Spiridonov

Voronezh State Technical University

Email: vcmsao13@mail.ru
Rússia, Moskovskii pr. 26, Voronezh, 394026

A. Dunaev

Voronezh State Technical University

Email: vcmsao13@mail.ru
Rússia, Moskovskii pr. 26, Voronezh, 394026

E. Bogdanovich

Voronezh State Technical University

Email: vcmsao13@mail.ru
Rússia, Moskovskii pr. 26, Voronezh, 394026

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2017