Development and Investigation of a Two-Phase Loop Thermosiphon with a Flat Evaporator at Different Slope Angles


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

We present the results of the development and experimental studies of a two-phase loop thermosiphon with a flat evaporator and ethanol as the working fluid. We investigate the thermal characteristics of the device within the temperature range of 20–80°C under the heat loads of 10–120 W, a filling ratio of 40%, and slope angles within the range of 0°–90°. The device is functional at all of the studied slope angles. The maximum heat load of 120 W was reached at the slope angle of 90°. Here, the average temperature of the evaporator surface was within 70°C and the maximum thermal resistance was equal to 0.41°C/W.

作者简介

V. Dmitrin

Institute of Thermal Physics, Ural Branch

Email: maidanik@yandex.ru
俄罗斯联邦, Ekaterinburg, 620016

Yu. Maydanik

Institute of Thermal Physics, Ural Branch

编辑信件的主要联系方式.
Email: maidanik@yandex.ru
俄罗斯联邦, Ekaterinburg, 620016

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2018