Email this article On the Selection of Technical Devices for an Electric Fork Lift Control System for Use at Textile Material Warehouses
- Authors: Chachina A.A.1, Ryzhkova E.A.1
-
Affiliations:
- Moscow State University of Design and Technology
- Issue: Vol 50, No 2 (2018)
- Pages: 135-137
- Section: Article
- URL: https://journals.rcsi.science/0015-0541/article/view/235307
- DOI: https://doi.org/10.1007/s10692-018-9948-5
- ID: 235307
Cite item
Open Access
Access granted
Subscription Access
Abstract
An analysis of different methods of managing electric fork lifts is carried out and the minimally necessary number of electric motors and their types are determined. An algorithm for serial introduction of electric motors into operation is developed and a method of control by means of a frequency regulator is determined.
About the authors
A. A. Chachina
Moscow State University of Design and Technology
Author for correspondence.
Email: nastyachachina@mail.ru
Russian Federation, Moscow
E. A. Ryzhkova
Moscow State University of Design and Technology
Email: nastyachachina@mail.ru
Russian Federation, Moscow
Supplementary files
