Email this article Mechanism for Increased Elasticity Modulus of Rusar Aramid Fiber After Electromagnetic Treatment
- Authors: Shebanov S.M.1, Novikov I.K.2, Pavlikov A.V.3, Spiridonov M.I.1, Anan’in O.B.2, Gerasimov I.A.2
-
Affiliations:
- LEKIS Laboratory of Experimental Research
- National Research Nuclear University MEPhI
- M. V. Lomonosov Moscow State University
- Issue: Vol 48, No 5 (2017)
- Pages: 398-401
- Section: Materials Science
- URL: https://journals.rcsi.science/0015-0541/article/view/234763
- DOI: https://doi.org/10.1007/s10692-017-9804-z
- ID: 234763
Cite item
Open Access
Access granted
Subscription Access
Abstract
The elasticity modulus of Rusar-NT aramid fiber was increased after electromagnetic treatment (EMT). A fiber sample was treated immediately after it was prepared and did not undergo additional chemical processing. The tensile strength increased by almost 20%; elasticity modulus, 11.48%. A comparison of IR and Raman spectra found that several spectral lines were shifted after EMT of the fiber.
About the authors
S. M. Shebanov
LEKIS Laboratory of Experimental Research
Email: sebanov_s@mail.ru
Russian Federation, Moscow
I. K. Novikov
National Research Nuclear University MEPhI
Email: sebanov_s@mail.ru
Russian Federation, Moscow
A. V. Pavlikov
M. V. Lomonosov Moscow State University
Author for correspondence.
Email: sebanov_s@mail.ru
Russian Federation, Moscow
M. I. Spiridonov
LEKIS Laboratory of Experimental Research
Email: sebanov_s@mail.ru
Russian Federation, Moscow
O. B. Anan’in
National Research Nuclear University MEPhI
Email: sebanov_s@mail.ru
Russian Federation, Moscow
I. A. Gerasimov
National Research Nuclear University MEPhI
Email: sebanov_s@mail.ru
Russian Federation, Moscow
Supplementary files
