Отправить статью по E-mail Use of Emulsion Explosives in Experimental Studies of Flows in the Bonding Zone in Explosive Welding
- Авторы: Zlobin B.S.1, Kiselev V.V.1, Shterzer A.A.1,2, Plastinin A.V.2
-
Учреждения:
- Design and Technology Department of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
- Lavrent’ev Institute of Hydrodynamics, Siberian Branch
- Выпуск: Том 54, № 2 (2018)
- Страницы: 231-237
- Раздел: Article
- URL: https://journals.rcsi.science/0010-5082/article/view/153122
- DOI: https://doi.org/10.1134/S0010508218020120
- ID: 153122
Цитировать
Открытый доступ
Доступ предоставлен
Только для подписчиков
Аннотация
Bonding of steels of different hardness through a ductile layer was obtained by explosive welding using an emulsion explosive. In the bonding zone, two types of waves were found: large waves and small waves which have not been observed in previous experiments. Empirical relations for calculating the wave size are proposed that take into account the influence of the strength and density of the colliding materials on them. Cracking in the bonding zone can be avoided by reducing the wave size.
Ключевые слова
Об авторах
B. Zlobin
Design and Technology Department of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: asterzer@mail.ru
Россия, Novosibirsk, 630090
V. Kiselev
Design and Technology Department of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: asterzer@mail.ru
Россия, Novosibirsk, 630090
A. Shterzer
Design and Technology Department of the Lavrent’ev Institute of Hydrodynamics, Siberian Branch; Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Автор, ответственный за переписку.
Email: asterzer@mail.ru
Россия, Novosibirsk, 630090; Novosibirsk, 630090
A. Plastinin
Lavrent’ev Institute of Hydrodynamics, Siberian Branch
Email: asterzer@mail.ru
Россия, Novosibirsk, 630090
Дополнительные файлы
