Enviar artigo por via de e-mail Mathematical Modeling of the Geometric Dimensions of Flexible Tanks for Oil Products
- Autores: Rybakov Y.N.1, Larionov S.V.1, Chirikov S.I.1, Kyunnap R.I.1
-
Afiliações:
- Federal Aviation Administration – 25 State Scientific Research Institute of Chemmotology of the Ministry of Defense of Russia
- Edição: Volume 51, Nº 6 (2016)
- Páginas: 636-639
- Seção: Article
- URL: https://journals.rcsi.science/0009-3092/article/view/234272
- DOI: https://doi.org/10.1007/s10553-016-0652-y
- ID: 234272
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
This article describes theoretical approaches to optimizing the geometric dimensions of flexible tanks for oil products with allowance for the total length of the welds on the top and bottom surfaces of the tanks. An algorithm, mathematical models, and an optimization criterion are proposed, making it possible to significantly (by up to 20%) improve the efficiency with which the structural material is laid out and cut. Formulas are given for determining the optimal height, length, and width of the flexible tanks.
Sobre autores
Yu. Rybakov
Federal Aviation Administration – 25 State Scientific Research Institute of Chemmotology of the Ministry of Defense of Russia
Autor responsável pela correspondência
Email: ribakov61@mail.ru
Rússia, Moscow
S. Larionov
Federal Aviation Administration – 25 State Scientific Research Institute of Chemmotology of the Ministry of Defense of Russia
Email: ribakov61@mail.ru
Rússia, Moscow
S. Chirikov
Federal Aviation Administration – 25 State Scientific Research Institute of Chemmotology of the Ministry of Defense of Russia
Email: ribakov61@mail.ru
Rússia, Moscow
R. Kyunnap
Federal Aviation Administration – 25 State Scientific Research Institute of Chemmotology of the Ministry of Defense of Russia
Email: ribakov61@mail.ru
Rússia, Moscow
Arquivos suplementares
