Thermophysical Validation of the Technology of Asphalt-Resin-Paraffin Deposit Removal from Well Casings in Continuous High-Viscosity Oil Production Conditions
- Autores: Dmitriev M.1, Ponomarenko A.1, Klachkov A.1
-
Afiliações:
- National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
- Edição: Volume 55, Nº 7-8 (2019)
- Páginas: 627-631
- Seção: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/236652
- DOI: https://doi.org/10.1007/s10556-019-00671-0
- ID: 236652
Citar
Resumo
The results of simulation of a system for removing asphalt-resin-paraffin deposits from casing of well with high-viscosity oil, based on local noncontact induction heating, are presented. It is shown that gradual removal of deposit fragments by melting them at the point of adhesion bonding with the casing is possible with a heating power of 3 kW and an inductor moving speed of 2–3 cm/min.
Palavras-chave
Sobre autores
M. Dmitriev
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Email: AGPonomarenko@mephi.ru
Rússia, Moscow
A. Ponomarenko
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Autor responsável pela correspondência
Email: AGPonomarenko@mephi.ru
Rússia, Moscow
A. Klachkov
National Research Nuclear University “Moscow Institute of Engineering Physics” (National’nyi Issledovatel’skii Yadernyi Universitet “MIFI”)
Email: AGPonomarenko@mephi.ru
Rússia, Moscow