Enviar artigo por via de e-mail Plate Manufacturing Technology for a Sectional Tool Made of Tungsten-Cobalt Hard Alloy
- Autores: Reva V.P.1, Mansurov Y.N.1, Kuryavyi V.G.2, Petrov V.V.3, Kim V.A.3
-
Afiliações:
- Far East Federal University
- Institute of Chemistry, Far East Branch of the Russian Academy of Sciences
- Komsomolsk-on-Amur State Technical University
- Edição: Volume 52, Nº 1-2 (2016)
- Páginas: 59-62
- Seção: Manufacturing Technology
- URL: https://journals.rcsi.science/0009-2355/article/view/234462
- DOI: https://doi.org/10.1007/s10556-016-0148-y
- ID: 234462
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Production aspects are provided for manufacturing sintered tungsten-cobalt alloy VK8 based on tungsten carbide prepared by mechanochemical synthesis. It is shown that experimental alloy VK8 physicomechanical, and operating properties significantly exceed those of commercial grade hard alloy, which opens up possibilities for its use in preparing cutting, drilling, and also stamping tools operating under dynamic conditions.
Palavras-chave
Sobre autores
V. Reva
Far East Federal University
Autor responsável pela correspondência
Email: festurvp@mail.ru
Rússia, Vladivostok
Yu. Mansurov
Far East Federal University
Email: festurvp@mail.ru
Rússia, Vladivostok
V. Kuryavyi
Institute of Chemistry, Far East Branch of the Russian Academy of Sciences
Email: festurvp@mail.ru
Rússia, Vladivostok
V. Petrov
Komsomolsk-on-Amur State Technical University
Email: festurvp@mail.ru
Rússia, Komsomolsk-on-Amur
V. Kim
Komsomolsk-on-Amur State Technical University
Email: festurvp@mail.ru
Rússia, Komsomolsk-on-Amur
Arquivos suplementares
