Analysis of Liquid-Heating Process in the Course of Compression in the Working Cavity of the Compressor Section of a Hybrid Piston Power Machine
- Authors: Shcherba V.E.1, Shalai V.V.1, Zanin A.V.1, Tegzhanov A.S.1
-
Affiliations:
- Omsk State Technical University
- Issue: Vol 55, No 7-8 (2019)
- Pages: 562-577
- Section: Compressors, Pumps, and Pipeline Fittings
- URL: https://journals.rcsi.science/0009-2355/article/view/236638
- DOI: https://doi.org/10.1007/s10556-019-00663-0
- ID: 236638
Cite item
Abstract
An analysis of the processes involved in heating of the liquid present above a piston in the working cavity of the compressor section of a positive-displacement hybrid power machine is given. On the basis of the general fundamental laws of conservation of energy and mass a thermodynamic calculation of the parameters of a two-phase, two-component open thermodynamic system with deformation and thermal interaction of phases is carried out. The influence of deformation work, external heat exchange, and direct-contact heat transfer on the variation of the temperature of the liquid is determined.
About the authors
V. E. Shcherba
Omsk State Technical University
Author for correspondence.
Email: scherba_v_e@list.ru
Russian Federation, Omsk
V. V. Shalai
Omsk State Technical University
Email: scherba_v_e@list.ru
Russian Federation, Omsk
A. V. Zanin
Omsk State Technical University
Email: scherba_v_e@list.ru
Russian Federation, Omsk
A. S. Tegzhanov
Omsk State Technical University
Email: scherba_v_e@list.ru
Russian Federation, Omsk