Modeling of the Process in a Packed Fractionating Column with Diffusive Liquid Phase Flow Pattern
- Authors: Golovanchikov A.B.1, Prokhorenko N.A.1
-
Affiliations:
- Volgograd State Technical University (Volgogradskii Gosudarstvennyi Tekhnicheskii Universitet)
- Issue: Vol 55, No 3-4 (2019)
- Pages: 186-196
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/236525
- DOI: https://doi.org/10.1007/s10556-019-00604-x
- ID: 236525
Cite item
Abstract
Working line and mass transfer equations are derived analytically for rectifying and stripping sections of a packed fractionating column with a diffusive continuous liquid phase flow pattern. A calculation algorithm is proposed and the obtained process and geometric parameters are compared with the same parameters of the same column calculated by the standard algorithm, taking account of the fact that the disperse gas phase has an ideal-displacement flow pattern and the continuous liquid phase has an ideal-mixing flow pattern.
About the authors
A. B. Golovanchikov
Volgograd State Technical University (Volgogradskii Gosudarstvennyi Tekhnicheskii Universitet)
Author for correspondence.
Email: pahp@vstu.ru
Russian Federation, Volgograd
N. A. Prokhorenko
Volgograd State Technical University (Volgogradskii Gosudarstvennyi Tekhnicheskii Universitet)
Email: pahp@vstu.ru
Russian Federation, Volgograd