Hydraulic Resistance of Tangential Swirlers


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The hydraulic resistance of nine tangential swirlers with rectilinear and sectional channels is measured. A comparison of the hydraulic resistance coefficients of the different swirlers is and it is established that the structural parameters of the swirlers and Reynolds number together exert a significant influence on the hydraulic resistance. It is shown that the resistance coefficient increases with increasing width of the swirler channel gap due to a decrease in the gas velocity and an increase of the force of viscous friction. A relationship for calculating the resistance coefficient of the swirlers is obtained.

About the authors

N. A. Voinov

Reshetnev Siberian State University of Science and Technologies

Author for correspondence.
Email: n.a.voynov@mail.ru
Russian Federation, Krasnoyarsk

D. A. Zemtsov

Reshetnev Siberian State University of Science and Technologies

Email: n.a.voynov@mail.ru
Russian Federation, Krasnoyarsk

O. P. Zhukova

Reshetnev Siberian State University of Science and Technologies

Email: n.a.voynov@mail.ru
Russian Federation, Krasnoyarsk

A. V. Bogatkova

Reshetnev Siberian State University of Science and Technologies

Email: n.a.voynov@mail.ru
Russian Federation, Krasnoyarsk


Copyright (c) 2019 Springer Science+Business Media, LLC, part of Springer Nature

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies