Efficiency of the Contact Stage of a Jet-Film Device During Rectification of Ethylbenzene–Styrene Mixture
- Authors: Dmitriev A.V.1, Dmitrieva O.S.1, Madyshev I.N.2, Nikolaev A.N.2
-
Affiliations:
- Kazan State Power Engineering University
- Kazan National Research Technological University
- Issue: Vol 53, No 7-8 (2017)
- Pages: 501-507
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/235796
- DOI: https://doi.org/10.1007/s10556-017-0371-1
- ID: 235796
Cite item
Abstract
A jet-film contact device was developed, and the principle of its operation is described. The results of studies on the effectiveness of the contact stage for different ratios of the liquid and vapor phases are presented based on the example of rectification of ethylbenzene–styrene mixture. The design parameters that affect the efficiency of the device are considered. The efficiency of implementing the contact device in mass transfer systems is discussed.
Keywords
About the authors
A. V. Dmitriev
Kazan State Power Engineering University
Author for correspondence.
Email: ieremiada@gmail.com
Russian Federation, Kazan
O. S. Dmitrieva
Kazan State Power Engineering University
Email: ieremiada@gmail.com
Russian Federation, Kazan
I. N. Madyshev
Kazan National Research Technological University
Email: ieremiada@gmail.com
Russian Federation, Kazan
A. N. Nikolaev
Kazan National Research Technological University
Email: ieremiada@gmail.com
Russian Federation, Kazan