Email this article Technical Means of Maintaining Wells on a Set Route
- Authors: Karmanov T.D.1, Kaliev B.Z.1, Nugumanov K.K.1, Chelpanov I.B.2, Kochetkov A.V.3
-
Affiliations:
- Satpaev Kazakh National Technical University
- State Research Center of the Russian Federation – Concern CSRI Elektropribor (TsNII Elektropribor)
- Perm National Research Polytechnic University
- Issue: Vol 52, No 7-8 (2016)
- Pages: 578-581
- Section: Information
- URL: https://journals.rcsi.science/0009-2355/article/view/234957
- DOI: https://doi.org/10.1007/s10556-016-0236-z
- ID: 234957
Cite item
Open Access
Access granted
Subscription Access
Abstract
A continuous-acting whipstock with hydromechanical working body by means of which the deviation from a set route may be substantially reduced in the process of drilling wells is developed.
Keywords
About the authors
T. D. Karmanov
Satpaev Kazakh National Technical University
Email: bakaliev@mail.ru
Kazakhstan, Almaty
B. Z. Kaliev
Satpaev Kazakh National Technical University
Author for correspondence.
Email: bakaliev@mail.ru
Kazakhstan, Almaty
K. K. Nugumanov
Satpaev Kazakh National Technical University
Email: bakaliev@mail.ru
Kazakhstan, Almaty
I. B. Chelpanov
State Research Center of the Russian Federation – Concern CSRI Elektropribor (TsNII Elektropribor)
Email: bakaliev@mail.ru
Russian Federation, St. Petersburg
A. V. Kochetkov
Perm National Research Polytechnic University
Email: bakaliev@mail.ru
Russian Federation, Perm
Supplementary files
