Email this article Preparation of Reactoplastic Nanomodified Polymer Composites. Part 4. Effectiveness of Modifying Epoxide Oligomers with Carbon Nanotubes (Review)
- Authors: Kolosov A.E.1
-
Affiliations:
- National Technical University of Ukraine – Kiev Polytechnic Institute (NTUU KPI)
- Issue: Vol 52, No 7-8 (2016)
- Pages: 573-577
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/234948
- DOI: https://doi.org/10.1007/s10556-016-0235-0
- ID: 234948
Cite item
Open Access
Access granted
Subscription Access
Abstract
Features and problems of producing reactoplastic nanomodified polymer composites were analyzed using modification of epoxide oligomers with carbon nanotubes as an example. Results from dispersion of highly viscous suspensions of epoxide oligomers with carbon nanotubes by a rolling method and by induction of low-frequency ultrasound cavitation were discussed. The efficiency of introducing the nanoparticles into the liquid polymer medium depended on not only the dose but also the mixing parameters.
About the authors
A. E. Kolosov
National Technical University of Ukraine – Kiev Polytechnic Institute (NTUU KPI)
Author for correspondence.
Email: a-kolosov@ukr.net
Ukraine, Kiev
