Email this article Explosive Pressing of Heat Resistant Polymers and Their Composites with PTFE-4
- Authors: Adamenko N.A.1, Agafonova G.V.1
-
Affiliations:
- Volgograd State Technical University
- Issue: Vol 52, No 7-8 (2016)
- Pages: 567-572
- Section: Fabrication Technology
- URL: https://journals.rcsi.science/0009-2355/article/view/234945
- DOI: https://doi.org/10.1007/s10556-016-0234-1
- ID: 234945
Cite item
Open Access
Access granted
Subscription Access
Abstract
Explosive pressing is presented as a promising polymer processing procedure. The effects of varying the static-pressing and explosive-pressing intensities on the thermal characteristics of polyacrylate, phenylone, and composites based on F-4 were compared. The formability of the materials during heat treatment after pressing and subsequent sintering is estimated. The stress and composite composition giving the most heat resistant material are determined.
About the authors
N. A. Adamenko
Volgograd State Technical University
Author for correspondence.
Email: mvpol@vstu.ru
Russian Federation, Volgograd
G. V. Agafonova
Volgograd State Technical University
Email: mvpol@vstu.ru
Russian Federation, Volgograd
