Email this article Numerical Modeling Procedure for Micromachined Cryogenic Cooler Elements Using ANSYS Fluent Software and Viscous Flow in a Small-Diameter Channel with Heat Transfer as an Example
- Authors: Kulik V.V.1, Parkin A.N.1, Navasardyan E.S.1
-
Affiliations:
- Bauman Moscow State Technical University
- Issue: Vol 52, No 7-8 (2016)
- Pages: 531-538
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/234900
- DOI: https://doi.org/10.1007/s10556-016-0227-0
- ID: 234900
Cite item
Open Access
Access granted
Subscription Access
Abstract
Initial results from a comparative analysis of hydrodynamic and heat-transfer data for the channel connecting compression and displacement volumes (thoroughfare) are attained by using semiempirical criterial functions and finite-element simulation with various RANS turbulence models for a reversed Stirling cryocooler. The model for the numerical experiment is created using the ANSYS Fluent CFD software.
About the authors
V. V. Kulik
Bauman Moscow State Technical University
Author for correspondence.
Email: vikakulik687@gmail.com
Russian Federation, Moscow
A. N. Parkin
Bauman Moscow State Technical University
Email: vikakulik687@gmail.com
Russian Federation, Moscow
E. S. Navasardyan
Bauman Moscow State Technical University
Email: vikakulik687@gmail.com
Russian Federation, Moscow
