Email this article Composite Material for Chemical and Petrochemical Equipment Friction Assemblies
- Authors: Budnik O.A.1, Sviderskii V.A.2, Budnik A.F.3, Berladir K.V.3, Rudenko P.V.3
-
Affiliations:
- Belgorod State Technological University
- National Technical University of Ukraine – Kiev Polytechnic Institute (NTUU KPI)
- Sumy State University
- Issue: Vol 52, No 1-2 (2016)
- Pages: 63-68
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/234466
- DOI: https://doi.org/10.1007/s10556-016-0149-x
- ID: 234466
Cite item
Open Access
Access granted
Subscription Access
Abstract
Questions are considered for optimizing and intensifying the traditional technology for preparing carbon fluoroplastic composite for piston compressor friction assemblies. A technology is developed for composite preparation and manufacturing methods in each stage, making it possible to create highly efficient and economically substantiated composites for piston compressor assemblies operating under dry friction conditions.
About the authors
O. A. Budnik
Belgorod State Technological University
Author for correspondence.
Email: phd.budnyk@gmail.com
Russian Federation, Belgorod
V. A. Sviderskii
National Technical University of Ukraine – Kiev Polytechnic Institute (NTUU KPI)
Email: phd.budnyk@gmail.com
Ukraine, Kiev
A. F. Budnik
Sumy State University
Email: phd.budnyk@gmail.com
Ukraine, Sumy
K. V. Berladir
Sumy State University
Email: phd.budnyk@gmail.com
Ukraine, Sumy
P. V. Rudenko
Sumy State University
Email: phd.budnyk@gmail.com
Ukraine, Sumy
