Fast Cyclic Compression Installation for Conversion of Light Hydrocarbons
- Authors: Ezdin B.S.1, Zarvin A.E.1, Yaskin A.S.1, Kalyada V.V.1, Konovalov S.A.1
-
Affiliations:
- Novosibirsk State University
- Issue: Vol 52, No 1-2 (2016)
- Pages: 26-28
- Section: Article
- URL: https://journals.rcsi.science/0009-2355/article/view/234427
- DOI: https://doi.org/10.1007/s10556-016-0141-5
- ID: 234427
Cite item
Abstract
A description of the installation for adiabatic compression in a cyclic process is presented here. Experimental results of conversion of light hydrocarbons by this process are given. New structural design solutions and ceramic coatings obtained by applying the technology of microarc oxidation were used in the compression unit of the chemical compression reactor (the piston–cylinder assembly). This allowed us to forego the use of compression rings and lubricant, to achieve a high compression ratio, and to obtain the pressure and temperature required in the reaction zone for oxidative conversion.
About the authors
B. S. Ezdin
Novosibirsk State University
Author for correspondence.
Email: sintez-t@ngs.ru
Russian Federation, Novosibirsk
A. E. Zarvin
Novosibirsk State University
Email: sintez-t@ngs.ru
Russian Federation, Novosibirsk
A. S. Yaskin
Novosibirsk State University
Email: sintez-t@ngs.ru
Russian Federation, Novosibirsk
V. V. Kalyada
Novosibirsk State University
Email: sintez-t@ngs.ru
Russian Federation, Novosibirsk
S. A. Konovalov
Novosibirsk State University
Email: sintez-t@ngs.ru
Russian Federation, Novosibirsk