电邮这篇文章 AUTOMATIC CONTROL OF DEBURRING MODULES IN A MACHINE FOR THE MECHANICAL EDGE PROCESSING OF SHEET METAL BLANKS
- 作者: Chepchurov M.S.1, Chetverikov B.S.1, Minasova V.E.1, Baranov D.S.1, Sanin S.N.1
-
隶属关系:
- Belgorod State Technological University named after V.G. Shukhov
- 期: 编号 1 (27) (2025)
- 页面: 12-20
- 栏目: Automation and Control of Technological Processes and Production, Automated Design Systems
- URL: https://journals.rcsi.science/2658-3488/article/view/361999
- ID: 361999
如何引用文章
全文:
详细
This work addresses issues related to controlling the mechanical edge processing of sheet metal blanks, specifically their deburring. The necessity of the deburring operation is due to the low surface quality of sheet material, which leads to both a reduction of finished product quality and additional material and time costs for correcting defects. Therefore, the task of developing an effective control algorithm for deburring modules is highly relevant. An analysis of the time costs of the deburring machine technological process in a real-world production setting has shown that the main costs are associated with deburring sheet material itself. The authors propose a design for a deburring machine and an algorithm for the automatic control of its modules. The developed scheme for taking readings and registering deburring wheel wear allows for the real-time registration of technological process parameters and the correction of the wear process of the abrasive deburring wheel, which is the main element of the deburring module. The authors have established that the total length of the working surface travel of the deburring wheel can be useful to predict wear, and the critical diameter of the deburring wheel can be applicable to limit its maximum usable diameter. Based on this, the work has proven that the control algorithm for the machine deburring module of the sheet metal blank edge cleaning should include a block implementing feedback on the abrasive wheel diameter, ensuring a constant cutting speed. Additionally, predefined parameters for the material removal process, based on the drive current value at a constant cutting speed, allow for ensuring the quality of the deburred sheet surface.
作者简介
Mihail Chepchurov
Belgorod State Technological University named after V.G. ShukhovDepartment of mechanical engineering technology, docent, doctor of technical sciences
Boris Chetverikov
Belgorod State Technological University named after V.G. Shukhov
Email: await_rescue@mail.ru
candidate of technical sciences 2016
Viktoriya Minasova
Belgorod State Technological University named after V.G. Shukhov
D. Baranov
Belgorod State Technological University named after V.G. Shukhov
Email: den-3218@yandex.ru
Sergei Sanin
Belgorod State Technological University named after V.G. Shukhovdocent
参考
Baron Y.M. Magnetic abrasive deburring tech-nology for blanks // International Journal of Engineering Research in Africa. – 2016. – № 25. – С. 1-10. Ягьяев Э.Э., Шрон Л.Б. Повышение эффективности и качества очистки поверхности листового металла методом лазерной абляции // Ученые записки Крымского инженерно-педагогического университета. – 2022. – № 3(77). – С. 217-223. Чепчуров М.С., Четвериков Б.С. Автоматизация производственных процессов. – М.: ИНФРА-М, 2019. – 274 с. Пашков А.Е., Чапышев А.П. Минимизация трудоёмкости технологической последовательности «дробеударное формообразование-зачистка» при изготовлении листовых деталей // Современные технологии. Системный анализ. Моделирование. – 2006. – № 8(12). – С. 42-45. Галеня И.Н., Кожухова М.С., Вишневский В.С., Коркишко А.Н. Применение и преимущества технологии лазерной очистки металла в сравнение с традиционной пескоструйной обработкой // Научно-технический вестник Поволжья. – 2024. – № 2. – С. 116-120. Чепчуров М.С., Четвериков Б.С., Минасова В.Е., Челядинов Д.В. Разработка алгоритма процесса снятия припуска дисковой иглофрезой с учетом угла зоны контакта иглофрезы и заготовки // Известия Тульского государственного университета. Техниче-ские науки. – 2023. – № 3. – С. 50-58. Чепчуров М.С. Измеpение и регистpация тока в цепи пpивода // Ремонт. Восстановление. Мо-дернизация. – 2008. – № 9. – С. 46-48. Соловьев А.И., Джафарова Ш.И., Савельева Л.В. Отделочно-зачистная обработка в условиях автоматизированного производства // Технология машиностроения. – 2019. – № 8. – С. 13-18. Jiang L., Yang Z., Li Y. An optimized calcula-tion method of the grinding wheel profile for the helical flute forming grinding // The International Journal of Ad-vanced Manufacturing Technology. – 2024. – № 132. – С. 1649-1664. Yagyaev E. Stabilization of processing quali-ty parameters at cylindrical external grinding by control of the rotational frequency of the grinding wheel // Mate-rials Today Proceedings. – 2020. – № 38. – С. 1882-1885.
补充文件
