Strength Improvement of Metals Produced by Selective Laser Melting of Powders
- Авторы: Barakhtin B.1, Zhukov A.1, Bobyr V.1, Shakirov I.1, Kuznetsov P.1
-
Учреждения:
- National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
- Выпуск: Том 10, № 6 (2019)
- Страницы: 1390-1393
- Раздел: Functional Materials
- URL: https://journals.rcsi.science/2075-1133/article/view/208132
- DOI: https://doi.org/10.1134/S2075113319060054
- ID: 208132
Цитировать
Аннотация
Standard samples for mechanical tests have been produced by selective laser melting (SLM) of metal powders of various chemical compositions. It has been determined that strength properties of all SLM samples are higher than those of solid samples of the same chemical composition. It has been established that the factors of strength improvement are vapor condensed nanoparticles above the melting zone and ultrafine grain structure formed at the stage of crystallization.
Ключевые слова
Об авторах
B. Barakhtin
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Автор, ответственный за переписку.
Email: mail@crism.ru
Россия, St. Petersburg, 191015
A. Zhukov
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
V. Bobyr
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
I. Shakirov
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015
P. Kuznetsov
National Research Center Kurchatov Institute—Central Research Institute of Structural Materials Prometey
Email: mail@crism.ru
Россия, St. Petersburg, 191015