Molding Features of Silicon Carbide Products by the Method of Hot Slip Casting
- Autores: Frolova M.1, Leonov A.1, Kargin Y.1, Lysenkov A.1, Titov D.1, Petrakova N.1, Perevislov S.2, Konovalov A.1, Sevostyanov M.1, Melnikova I.3
-
Afiliações:
- Baikov Institute of Metallurgy and Materials Science
- St. Petersburg State Institute of Technology (Technical University)
- State Scientific Research Institute of Civil Aviation
- Edição: Volume 9, Nº 4 (2018)
- Páginas: 675-678
- Seção: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207555
- DOI: https://doi.org/10.1134/S2075113318040123
- ID: 207555
Citar
Resumo
The effect of the content of temporary process binder (paraffin, oleic acid, and beeswax) in the range of 10–18% on the molding of the silicon carbide products using hot slip casting has been studied. It has been determined that the flawless compact blanks based on SiC with Y3Al5O12 can be prepared at the TPB content of 14%. The conditions of four-stage heat treatment of the specimens during removal of TPB have been determined. The bending strength of the ceramic specimens prepared by sintering of the blanks at 1800°C is 437 ± 0.2 MPa.
Palavras-chave
Sobre autores
M. Frolova
Baikov Institute of Metallurgy and Materials Science
Autor responsável pela correspondência
Email: frolovamarianna@bk.ru
Rússia, Moscow
A. Leonov
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
Yu. Kargin
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
A. Lysenkov
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
D. Titov
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
N. Petrakova
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
S. Perevislov
St. Petersburg State Institute of Technology (Technical University)
Email: frolovamarianna@bk.ru
Rússia, St. Petersburg
A. Konovalov
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
M. Sevostyanov
Baikov Institute of Metallurgy and Materials Science
Email: frolovamarianna@bk.ru
Rússia, Moscow
I. Melnikova
State Scientific Research Institute of Civil Aviation
Email: frolovamarianna@bk.ru
Rússia, Moscow