Enviar artigo por via de e-mail Metal-Ceramic Composites Based on Iron Oxide for Low-Consumption Anode during Electrolytic Extraction of Aluminum
- Autores: Kargin Y.1, Samoilov E.1, Makarenkov V.1, Lysenkov A.1
-
Afiliações:
- Baikov Institute of Metallurgy and Materials Science (IMET)
- Edição: Volume 9, Nº 1 (2018)
- Páginas: 52-56
- Seção: Article
- URL: https://journals.rcsi.science/2075-1133/article/view/207088
- DOI: https://doi.org/10.1134/S207511331801015X
- ID: 207088
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Metal-ceramic materials based on NiFe2O4 and Fe2O3 with additions of copper oxide and transition metals Cu, Ni, Co, and Fe were obtained. Changes in the phase content of materials based on iron oxide were shown, and the electrical conductivity of the obtained composites was studied. Samples of inert anodes were tested in an electrolytic cell; high resistance of cermets NiFe2O4 + Cu, Ni against alumina-cryolite melts and stability of aluminum electrolysis were established.
Palavras-chave
Sobre autores
Yu. Kargin
Baikov Institute of Metallurgy and Materials Science (IMET)
Autor responsável pela correspondência
Email: yu.kargin@rambler.ru
Rússia, Moscow
E. Samoilov
Baikov Institute of Metallurgy and Materials Science (IMET)
Email: yu.kargin@rambler.ru
Rússia, Moscow
V. Makarenkov
Baikov Institute of Metallurgy and Materials Science (IMET)
Email: yu.kargin@rambler.ru
Rússia, Moscow
A. Lysenkov
Baikov Institute of Metallurgy and Materials Science (IMET)
Email: yu.kargin@rambler.ru
Rússia, Moscow
