Phase composition and defect substructure of double surfacing, formed with V–Cr–Nb–W powder wire on steel

Resumo

The analysis of phase composition, defect substructure, and mechanical and tribological properties of Hardox 450 steel after single and double surfacing of C–V–Cr–Nb–W containing wire was carried out by methods of modern physical materials science. The increase in the wear resistance of the material compared to the original steel by 140–150 times and reduction of the friction coefficient by 2–2.5 times was established. The change in the fine structure and phase composition of the surfaced metal was analyzed. It was shown that the established effects could be associated with the formation of a multiphase nanoscale and submicron structure, hardening of which was associated with the formation of martensitic structure of α-matrix and the presence of a high volume fraction of carbide phase inclusions based on Fe, Cr, W and Nb. Formation of resurfacing led to repeated increase in the volume fraction of the carbide phase and the absence of the oxide phase.