On the Al5083–Al2O3–TiO2 Hybrid Surface Nanocomposite Produced by Friction Stir Processing

详细

In this study Al5083–Al₂O₃–TiO₂ hybrid surface nanocomposite was successfully prepared by friction stir processing (FSP). The effects of different combination of rotational and travel speed of tool were investigated. The samples were characterized by optical and scanning electron microscopy (SEM), microhardness and undergone tensile and wear tests. Based on the maximum tensile strength and hardness value, optimum rotational speed of 710 rpm and travel speed of 20 mm/min was achieved. The microhardness and tensile strength of the as-received alloy and specimens having optimum surface nanocomposite were about 80 Hv, 285 MPa, 140 Hv and 375 MPa, respectively. Surface nanocomposites showed significantly lower friction coefficients and wear rates than those obtained for substrate. Based on scanning electron microscopy tests, abrasive wear as dominant wear mechanism was detected.