Email this article Quartz Sorption Sensors for Aceton Vapor
- Authors: Simonov V.N.1,2, Fomkin A.A.1, Vlasov D.A.1, Grankina T.Y.1
-
Affiliations:
- Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
- National Research Nuclear University Moscow Engineering Physics Institute
- Issue: Vol 55, No 4 (2019)
- Pages: 803-806
- Section: Investigation Methods for Physicochemical Systems
- URL: https://journals.rcsi.science/2070-2051/article/view/205420
- DOI: https://doi.org/10.1134/S2070205119040233
- ID: 205420
Cite item
Open Access
Access granted
Subscription Access
Abstract
The ratios between the film-sorbent parameters, sensitivity, and quartz sorption sensors’ sensitivity threshold have been obtained and analyzed. It has been demonstrated that, for the sorption sensors of vapors and gases based on polymer films, there exists a range of optimal values of thickness caused by its effect on the elastic properties. For acetone vapor sensors with a film made of polymethyl methacrylate (PMMA), this range is equal to 0.4–0.6% of the sensor’s plate thickness at the film deposition on both sides of the plate.
About the authors
V. N. Simonov
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences; National Research Nuclear University Moscow Engineering Physics Institute
Author for correspondence.
Email: simonov.valer@yandex.ru
Russian Federation, Moscow, 119071; Moscow, 115409
A. A. Fomkin
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Email: simonov.valer@yandex.ru
Russian Federation, Moscow, 119071
D. A. Vlasov
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Email: simonov.valer@yandex.ru
Russian Federation, Moscow, 119071
T. Yu. Grankina
Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences
Email: simonov.valer@yandex.ru
Russian Federation, Moscow, 119071
Supplementary files
