New methods for the preparation of high-octane components from catalytic cracking olefins

A. S. Kharitonov; D. P. Ivanov; M. V. Parfenov; L. V. Piryutko; S. V. Semikolenov; K. A. Dubkov; V. Yu. Pereima; A. S. Noskov; D. O. Kondrashev; A. V. Kleymenov; O. S. Vedernikov; S. E. Kuznetsov; V. V. Galkin; P. A. Abrashenkov

doi:10.1134/S2070050417030060

New methods for the preparation of high-octane components from catalytic cracking olefins

Авторлар: Kharitonov A.S.¹, Ivanov D.P.¹, Parfenov M.V.¹, Piryutko L.V.¹, Semikolenov S.V.¹, Dubkov K.A.¹, Pereima V.Y.¹, Noskov A.S.¹, Kondrashev D.O.², Kleymenov A.V.², Vedernikov O.S.², Kuznetsov S.E.³, Galkin V.V.³, Abrashenkov P.A.³
Мекемелер:
1. Boreskov Institute of Catalysis, Siberian Branch
2. Gazprom Neft
3. Gazpromneft-MNPZ
Шығарылым: Том 9, № 3 (2017)
Беттер: 204-211
Бөлім: Catalysis in Petroleum Refining Industry
URL: https://journals.rcsi.science/2070-0504/article/view/202569
DOI: https://doi.org/10.1134/S2070050417030060
ID: 202569

Дәйексөз келтіру

Толық мәтін

Ашық рұқсат
Рұқсат жабық

Рұқсат берілді
Рұқсат жабық

Тек жазылушылар үшін

Аннотация
Авторлар туралы
Әдебиет тізімі
Қосымша файлдар
Статистика

Аннотация

A new method has been suggested for the preparation of high-octane components from the butane–butylene fraction (BBF) in two stages. At the first stage, the BBF olefins are oxidized with N₂O into carbonyl compounds with high selectivity without forming the products of deep oxidation and water. The process occurs in the gas phase in a flow reactor without using a catalyst at a temperature of 400°C and a pressure of 2 MPa with high conversion of both olefins and nitrous oxide. The blending octane number of the oxidation product is 118–133 (RON) and 99–104 (MON). At the second stage, the mixture of carbonyl compounds is hydrogenated with hydrogen in the presence of the Ni/Al₂O₃ catalyst. The hydrogenation occurs at 150–160°C in a flow reactor in the gas phase. The aldehydes are completely transformed into alcohols, while the ketones can remain in the product under certain conditions. The blending octane number of the hydrogenation product is 111–112 (RON) and 95–96 (MON), which is smaller than for the BBF oxidation product, but larger than for the alkylate obtained in the course of conventional butene alkylation with isobutane (RON is 95–97 and MON is 93–95). Synthesis of high-octane components by this procedure can be useful in practice, especially in productions with huge release of nitrous oxide.

Негізгі сөздер

high-octane component, octane number, carbonyl compounds, ketones, alcohols, ethers, oxidation of olefins, hydrogenation of carbonyl compounds

Қосымша файлдар

Әрекет

1. JATS XML

Жүктеу

Пайдаланушының аты
Құпиясөз
Мені есте сақтау

Құпия сөзді ұмыттыңыз ба?	Тіркеу

Пайдаланушының аты
Құпиясөз
Мені есте сақтау

Құпия сөзді ұмыттыңыз ба?	Тіркеу

New methods for the preparation of high-octane components from catalytic cracking olefins

Толық мәтін

Аннотация

Негізгі сөздер

Авторлар туралы

A. Kharitonov

D. Ivanov

M. Parfenov

L. Piryutko

S. Semikolenov

K. Dubkov

V. Pereima

A. Noskov

D. Kondrashev

A. Kleymenov

O. Vedernikov

S. Kuznetsov

V. Galkin

P. Abrashenkov

Қосымша файлдар