Обзор современных материалов для изготовления керамических коронок у кресла пациента методом компьютерного фрезерования


Цитировать

Полный текст

Аннотация

Дан обзор современных керамических материалов для CAD/CAM-технологий у кресла пациента с целью оптимизации выбора блоков при изготовлении CEREC-коронок в различных клинических случаях.

Об авторах

Алена Сергеевна Мельник

ГБОУ ВПО «Московский государственный медико-стоматологический университет им. А.И. Евдокимова»

Email: melnikals@icloud.com
127206, г. Москва

К. Э Горяинова

ГБОУ ВПО «Московский государственный медико-стоматологический университет им. А.И. Евдокимова»

127206, г. Москва

И. Ю Лебеденко

ГБОУ ВПО «Московский государственный медико-стоматологический университет им. А.И. Евдокимова»

127206, г. Москва

Список литературы

  1. Bindl A.H., Luthy W.H. Mormann Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns. Dent. Materials. 2006; 22(1): 29-36.
  2. Bindl A., Richter B., Mormann W. The proven, esthetic selection of CAD/CAM materials. Int. J. Prosthodont. 2005; 18: 219-24.
  3. Fradeani M. Стеклокерамические реставрации на основе дисиликата лития. Показания к применению и методические рекомендации. Квинтэссенция. 2002; 2: 7-16.
  4. McLaren E., Edwar A., Russell A. A new option for single or multiunit all-ceramic anterior restoration. Quintessence Dent. Technol. 2010: 26: 69-81.
  5. Tinschert J., Zwez D., Marx R., Anusavice K.J. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. Dentistry. 2000; 28(7): 529-35.
  6. Официальная брошюра «IPS E. max CAD» Ivoclar Vivadent, Лихтенштейн.
  7. Scientific Documentation IPS E. max CAD P.1-16.
  8. Scientific Report IPS E. max Vol. 02/2001-2013.
  9. Ostermann D. Результат революции в стеклокерамике - Vita Suprinity. Зубной техник. 2013; 6: 24-5.
  10. Официальная брошюра «Suprinity» Vita Zahnfabrik, Германия. 08.2013.
  11. J. Dent. Visionist. 2013; 2: 1-19.
  12. Официальная брошюра «Celtra DUO" Dentsply, Degudent GmbH, Германия.
  13. Захаров Д.З. Современные керамические материалы, используемые в ортопедической стоматологии для изготовления зубных протезов. Стоматология. 2009; 2: 80-2.
  14. Guazzato M., Albakry M., Ringer S.P., Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent. Materials. 2004; 20(5): 441-8.
  15. Quinn J.B., Sundar V., Lloyd I.K. Influence of microstructure and chemistry on the fracture toughness of dental ceramics. Dent. Materials. 2003; 19(7): 603-11.
  16. Denry I., Holloway J. Ceramics for dental applications: A review. Materials. 2010; 3(1): 351-68.
  17. Zimmermanna M., Mehlb A., Reich S. New CAD/CAM materials and blocks for chairside procedures. Int. J. Computer. Dent. 2013; 16: 173-81.
  18. Вафин С.М. Сравнительные испытания керамических блоков «Vitablocs Mark II” и ситалловых блоков “Симет” на определение относительного предела прочности на сжатие и их микротвердости. В кн.: Сборник трудов Конференции молодых ученых стоматологов-ортопедов, посвященной проф. В.Ю. Курляндскому. М.; 2004.
  19. McLaren E., Puri S. CEREC materials overview. Different selections for milling restorations. CERECDoctors. 2013; 1: 52-5.
  20. Vich A., Sedda M., Del Siena F., Louca C., Ferrari M. Flexural resistance of Cerec CAD/CAM system ceramic blocks. Part 1: Chairside materials. Am. J. Dentistry. 2013; 26(5): 255-9.
  21. Официальная брошюра «Vitablocs» Vita Zahnfabrik, Германия. 03.2012.
  22. Donovan T.E., Cho G.C. The role of all-ceramic crowns in contemporary restorative dentistry. Am. Dent. Assoc. J. 2003; 31(7): 565-9.
  23. Jenatschke R., Fischer C. В центре внимания выбор материала. Новое в стоматологии. 2013; 7: 50-60.
  24. Доменюк Д.А., Гаража С.Н., Иванчева Е.Н. Прогнозирование клинической эффективности цельнокерамических реставраций с учетом микроструктурных особенностей. Российский стоматологический журнал. 2010; 4: 10-2.
  25. Xu H. Measurement of thermal expansion coefficient of human teeth. Aust. Dent. J. 1989; 34(6): 530-5.
  26. Chen S., Zhang Z.T. Three-year clinical observation and failure analysis of all-ceramic restorations made by chair-side computer aided design and computer aided manufacture system. Chin. J. Stomatol. 2007; 42(6): 337-9.
  27. Mao Y., Gao Y., Wang Z.Y., Gao B., Ma C.F. An 8-year follow-up study of Cerec2 computer aided design and computer aided manufacture of all-ceramic crowns. Chin. J. Stomatol. 2008; 43(12): 752-3.
  28. Reiss B. Klinische Uberlebensrate von Restaurationen aus VITABLOCS for CEREC. Int. J. Comp. Dentistry. 2006; 9: 11-22.
  29. Fasbinder D.J., Dennison J.B., Heys D., Neiva G. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J. Am. Dent. Assoc. 2010; 141: 10-4.
  30. Reich S., Fischer S., Sobotta B., Klapper H.U., Gozdowski S. A preliminary study on the short-term efficacy of chairside computeraided design/computer-assisted manufacturing-generated posterior lithium disilicate crowns. Int. J. Prosthodont. 2010; 23: 214-6.
  31. Bindl A., Mormann W.H. Survival rate of mono-ceramic and ceramic-core CAD/CAM-generated anterior crowns over 2-5 years. Eur. J. Oral Sci. 2010; 112(2): 197-204.
  32. Nathanson D. Clinical performance and fit of a milled ceramic crown system. IADRAbstr. 2008; 303: 101-12.
  33. Pjetursson B.E., Sailer I., Zwahlen M. A systematic review of the survival and complication rates of all ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin. Oral Implant. Res. 2007; 3: 73-85.
  34. Reich S., Schierz O. Chair-side generated posterior lithium disilicate crowns after 4 years. Clin. Oral Invest. J. 2012; 17(1): 275-84.
  35. Richter J., Schweiger J., Gernet W., Beuer F. Clinical Performance of CAD/CAM-fabricated lithium disilicate restorations. IADR Abstr. 2009; 82: 98-101.
  36. Schultheis S., Strub J.R., Gerds T.A., Guess P.C. Monolithic and bilayer CAD/CAM lithium-disilicate versus metal-ceramic fixed dental prostheses: comparison of fracture loads and failure modes after fatigue. Clin. Oral Invest. 2012; 23: 151-9.
  37. Van Noort R. An Introduction to Dental Materials. Edinburgh: Mosby; 2002.
  38. Strub J.R. Fatigue Behaviour and Failure Modes of Monolithic CAD/CAM Hybrid-ceramic and All-ceramic Posterior Crown Restorations; 2013.

© ООО "Эко-Вектор", 2014


 


Данный сайт использует cookie-файлы

Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, которые обеспечивают правильную работу сайта.

О куки-файлах