Многослойные заготовки стоматологической керамики на основе диоксида циркония. Обзор литературы
- Авторы: Ненашева Е.А.1, Быкова М.В.1, Гук Н.О.1, Лебеденко И.Ю.1, Шумская Д.А.1, Быков Д.О.2
-
Учреждения:
- Российский университет дружбы народов
- Московский государственный медико-стоматологический университет имени А.И. Евдокимова
- Выпуск: Том 27, № 2 (2023)
- Страницы: 139-153
- Раздел: Обзоры
- URL: https://journals.rcsi.science/1728-2802/article/view/131239
- DOI: https://doi.org/10.17816/dent340839
- ID: 131239
Цитировать
Аннотация
Представлен обзор по многослойной стоматологической керамике на основе диоксида циркония. Рассмотрены классификации стоматологической керамики на основе диоксида циркония и виды многослойных заготовок из диоксида циркония. Приведены примеры фирм, выпускающих многослойный диоксид циркония. Описаны прочностные и эстетические свойства разных слоёв многослойных заготовок. Указано, что введение окрашивающих добавок не влияет на механическую прочность многослойного диоксида циркония. Увеличение содержания оксида иттрия в составе многослойного диоксида циркония приводит к увеличению прозрачности, однако при этом снижается механическая прочность. Многослойная керамика более высокой степени прозрачности обладает худшими физико-механическими свойствами, чем менее прозрачные материалы. Пескоструйная обработка приводит к снижению механической прочности многослойного диоксида циркония. Если слои многослойного диоксида циркония различаются по цвету, но имеют одинаковую структуру, то показатели прочности каждого слоя многослойной заготовки находятся на одном уровне, однако если слои многослойного диоксида циркония различаются по структуре, то их прочность в пределах одной заготовки будет разной. Приведены преимущества и недостатки многослойных заготовок стоматологической керамики на основе диоксида циркония. Уделено внимание перспективам применения многослойной стоматологической керамики на основе диоксида циркония в России.
Полный текст
Открыть статью на сайте журналаОб авторах
Елизавета Андреевна Ненашева
Российский университет дружбы народов
Автор, ответственный за переписку.
Email: dr.vasyuta@mail.ru
ORCID iD: 0000-0001-6433-3953
SPIN-код: 4902-5144
аспирант
Россия, МоскваМарина Владимировна Быкова
Российский университет дружбы народов
Email: bykova_mv@pfur.ru
ORCID iD: 0000-0003-0504-7767
SPIN-код: 9380-8298
к.м.н., доцент
Россия, МоскваНикита Октавианович Гук
Российский университет дружбы народов
Email: dr.guknikita@yandex.ru
ORCID iD: 0009-0001-9502-2397
аспирант
Россия, МоскваИгорь Юльевич Лебеденко
Российский университет дружбы народов
Email: lebedenkoi@mail.ru
ORCID iD: 0000-0002-4050-484X
SPIN-код: 3863-2409
д.м.н., профессор
Россия, МоскваДжамиля Айдаровна Шумская
Российский университет дружбы народов
Email: djamilundel@ya.ru
ORCID iD: 0000-0003-1885-4269
SPIN-код: 1235-2959
к.м.н.
Россия, МоскваДенис Олегович Быков
Московский государственный медико-стоматологический университет имени А.И. Евдокимова
Email: 13dantist@mail.ru
ORCID iD: 0000-0003-4978-2608
SPIN-код: 4963-8000
к.м.н.
Россия, МоскваСписок литературы
- Будников П.П., Балкевич В.Л., Бережной А.С. и др. Химическая технология керамики и огнеупоров. М. : Изд-во литературы по строительству, 1972. C. 299–301.
- Evans G. Analysis of Strength Degradation After Sustained Loading // J Amer Ceram Soc. 1974. Vol. 57, N 9. P. 410–411.
- Garvie R.C., Hannink R., Pascoe R. Ceramic steel? // Nature. 1975. Vol. 258. P. 703–704, doi: 10.1038/258703a0
- Ban S. Classification and properties of dental Zirconia as implant fixtures and superstructures // Materials. 2021. Vol. 14, N 4879. P. 2–26. doi: 10.3390/ma14174879
- Stawarczyk B., Keul K., Eichberger M., et al. Three generations of zirconia: From veneered to monolithic. Part 1 //Quintessence Int. 2017. Vol. 48, N 5. P. 369–380, doi: 10.3290/j.qi.a38057
- Zhang Y., Lawn B. Novel zirconia materials in dentistry // J Dent Res. 2018. Vol. 97, N 2. P. 140–147. doi: 10.1177/0022034517737483
- Larsson C., Vult von Steyern P. Implant-supported full-arch zirconia-based mandibular fixed dental prostheses: eight-year results from a clinical pilot study // Acta Odontol Scand. 2013. Vol. 71, N 5. P. 1118–1122. doi: 10.3109/00016357.2012.749518
- Rinke S., Buergers R., Ziebolz D., Roediger M. Clinical outcome of double crown-retained implant overdentures with zirconia primary crowns // J Adv Prosthodont. 2015. Vol. 7, N 4. P. 329–337. doi: 10.4047/jap.2015.7.4.329
- Gseibat M., Sevilla P., Lopez-Suarez C., et al. Prospective clinical evaluation of posterior third-generation monolithic zirconia crowns fabricated with complete digital workflow: Two-year Follow-Up // Materials (Basel). 2022. Vol. 15, N 2. P. 672. doi: 10.3390/ma15020672
- Pohlig M. An examination of the field of application of multilayer zirconium oxide the choice of material of zirconium oxide multilayer // www.palmerimediagroup.com. 2022. Vol. 21, N 8. P. 50–56.
- Harada K., Ralgrodski A., Chung K., et al. A comparative evaluation of the translucency zirconias and lithium disilicate for monolithic restorations // J Prosthet Dent. 2016. Vol. 116. P. 257–263. doi: 10.1016/j.prosdent.2015.11.019
- Kolakarnprasert N., Kaizer M., Kim K., Zhang Y. New multi-layered zirconias: Composition, microstructure, and translucency // Dental Materials J. 2019. Vol. 35, N 5. P. 797–806. doi: 10.1016/j.dental.2019.02.017
- Fine-structure feldspar ceramic VITABLOCS TriLuxe Forte. Доступ по ссылке: https://www.amanngirrbach.com/en/products/cadcam-material/ceramic/vitablocs-triluxe-forte. Дата обращения: 05.04.2023.
- VITABLOCS TriLuxe Forte. Доступ по ссылке: https://www.caddent.de/en/wiki/vitablocs-triluxe-forteДата обращения: 06.04.2023. IPS e.max Press Multi. Доступ по ссылке: https://pdf.medicalexpo.com/pdf/ivoclar-vivadent/ips-emax-press-multi/72878-186099.html. Дата обращения: 07.04.2023.
- Fu L., Engqvist H., Xia W. Glass-Ceramics in Dentistry: A Review // Materials. 2020. Vol. 13, N 1049. P. 2–23. doi: 10.3390/ma13051049
- Erdelt K., Engler M., Beuer F., et al. Computable translucency as a function of thickness in a multi-layered zirconia // J Prosthet Dent. 2019. Vol. 121, N 4. P. 683–689. doi: 10.1016/j.prosdent.2018.08.013
- Shoji K. Cases of Multi-Layered Zirconia Restorations with High Translucency // Spectrum dialogue. 2019. Vol. 18, N 7. P. 20–37.
- Дьяконенко Е.Е., Лебеденко И.Ю. Эстетика монолитных зубных протезов на основе диоксида циркония // Зубной техник. 2018. Т. 3, № 128. С. 22–32.
- Multilayer Zirconia. Доступ по ссылке: https://www.kuraraynoritake.com/world/product/cad_materials/katana_zirconia.html. Дата обращения: 08.04.2023.
- Vaz Machry R., Dapieve K., Cadore-Rodrigues A., et al. Mechanical characterization of a multi-layered zirconia: Flexural strength, hardness, and fracture toughness of the different layers // J Mech Behav Biomed Mater. 2022. Vol. 135. P. 105455. doi: 10.1016/j.jmbbm.2022.105455
- Optimill Multilayer 3D. Доступ по ссылке: https://dentona.de/en/zirkon-sonderverkauf/316/optimill-multilayer-3d. Дата обращения: 09.04.2023.
- Wille S., Zumstrull P., Kaidas V., et al. Low temperature degradation of single layers of multilayered zirconia in comparison to conventional unshaded zirconia: phase transformation and flexural strength // J Mech Biomed Mater. 2018. Vol. 77. P. 171–175. doi: 10.1016/j.jmbbm.2017.09.010
- Elsaka S. Optical and Mechanical Properties of Newly Developed Monolithic Multilayer Zirconia // J Prosthodont. 2019. Vol. 28, N 1. P. e279–e284. doi: 10.1111/jopr.12730
- Yu N.K., Park M.G. Effect of different coloring liquids on the flexural strength of multilayered zirconia // J Adv Prosthodont. 2019. Vol. 11, N 4. P. 209–214. doi: 10.4047/jap.2019.11.4.209
- Alves M., Abreub L., Klippel G., et al. Mechanical properties, and translucency of a multi-layered zirconia with color gradient for dental applications // Ceramics International. 2020. Vol. 47, N 1. P. 2–9. doi: 10.1016/j.ceramint.2020.08.134
- Paek T., Fan Y., Giordano R. Mechanical Properties of Translucent Multilayered Dental Zirconia // J Dent & Oral Disord. 2020. Vol. 6, Iss. 1. P. 1–3.
- Maruo Y., Yoshihara K., Irie M., et al. Flexural properties, bond ability, and crystallographic phase of highly translucent multi-layered zirconia // J Applied Biomat Funct Mater. 2020. Vol. 18. P. 2–9. doi: 10.1177/2280800020942717
- Kaizer M., Kolakarnpraserta N., Rodrigues C., et al. Probing the interfacial strength of novel multi-layer zirconias // Dent Mater. 2020. Vol. 36, N 1. P. 60–67. doi: 10.1016/j.dental.2019.10.008
- Antón X., Liebermann A., Hampe R., et al. Impact of high-speed sintering and choice of preshaded monochrome or multilayered blanks on fatigue behavior of 4 mol% yttria-stabilized tetragonal zirconia polycrystal // J Prosthet Dent. 2021. Vol. S0022-3913, N 21. P. 00627-2. doi: 10.1016/j.prosdent.2021.11.006
- Winter A., Schurig A., Odenthal A.-L., Schmitter M. Impact of different layers within a blank on mechanical properties of multi-layered zirconia ceramics before and after thermal aging // Dent Mater. 2022. Vol. 38, N 5. P. e147–e154, doi: 10.1016/j.dental.2022.03.009
- Pöppel M., Rosentritt M., Sturm R., et al. Fracture Load and Fracture Patterns of Monolithic Three-Unit Anterior Fixed Dental Prostheses after In Vitro Artificial Aging — A Comparison between Color-Gradient and Strength-Gradient Multilayer Zirconia Materials with Varying Yttria Content // J Clin Med. 2022. Vol. 11. P. 4982. doi: 10.3390/jcm11174982
- Bruhnke M., Awwad Y., Müller W., et al. Mechanical Properties of New Generations of Monolithic, Multi-Layered Zirconia // Materials. 2023. Vol. 16, N 1. P. 276. doi: 10.3390/ma16010276
- Li X., Wang Q., Qui X., Zhao B. Effect of different CAD/CAM cutting depths on the post-fatigue load-bearing capacity of novel multilayer zirconia restorations // J Dent. 2021. Vol. 111. P. 103709. doi: 10.1016/j.jdent.2021.103709
- Badr Z., Zhang Y., Sulaiman T. Survivability, and fracture resistance of monolithic and multi-yttria-layered zirconia crowns as a function of yttria content: A mastication simulation study // J Esthet Restor Dent. 2022. Vol. 34, N 9. P. 1–8. doi: 10.1111/jerd.12907
- Heidari N., Amawi R., Seweryniak P., et al. Fracture Resistance and Fracture Behaviour of Monolithic Multi-Layered Translucent Zirconia Fixed Dental Prostheses with Different Placing Strategies of Connector: An in vitro Study // Clinical, Cosmetic and Investigational Dentistry. 2022. Vol. 14. P. 61–69. doi: 10.2147/CCIDE.S344941
- Rosentritt M., Preis V., Schmid A., Strasser T. Multilayer zirconia: Influence of positioning within blank and sintering conditions on the in vitro performance of 3-unit fixed partial dentures // J Prosthet Dent. 2022. Vol. 127, N 1. P. 141–145. doi: 10.1016/j.prosdent.2020.11.009
- Ziyad T., Abu-Naba’a L., Almohammed S. Optical properties of CAD-CAM monolithic systems compared: three multi-layered zirconia and one lithium disilicate system // Heliyon. 2021. Vol. 7, N 10. P. e08151. doi: 10.1016/j.heliyon.2021.e08151
- Shamseddine L., Majzoub Z. Relative Translucency of a Multilayered Ultra translucent Zirconia Material // J Contemp Dent Pract. 2017. Vol. 18, N 12. P. 1099–1106. doi: 10.5005/jp-journals-10024-2183
- Ueda K., Gueth J.-F., Erdelt K., et al. Light transmittance by a multi-coloured zirconia material // Dent Mater J. 2015. Vol. 34, N 3. P. 310–314. doi: 10.4012 /dmj. 2014-238
- Kang C.-M., Peng T.-Y., Shimoe S. Color accuracy of different types of monolithic multilayer precolored zirconia ceramics // J Prosthet Dent. 2020. Vol. 124, N 6. P. 789.e1–789.e7. doi: 10.1016/j.prosdent.2020.04.026
- Shirani M., Savabi O., Mosharraf R., et al. Comparison of translucency and opalescence among different dental monolithic ceramics // J Prosthet Dent. 2021. Vol. 126, N 3. P. 446e1–446e6, doi: 10.1016/j.prosdent.2021.04.030
- Khosravani S., Kahnamoui M., Kimyai S., et al. Final colour of ultra translucent multilayered zirconia veneers, effect of thickness, and resin cement shade // Biomed Res Int. 2022. Vol. 2022. P. 2555797. doi: 10.1155/2022/2555797
- Cho M.-H., Seol H.-J. Optical properties, microstructure, and phase fraction of multi-layered monolithic zirconia with and without yttria-gradient // Materials. 2022. Vol. 16, N 1. P. 41. doi: 10.3390/ma16010041
- Marchesi G., Piloni A., Nicolin V., et al. Chairside CAD/CAM Materials: Current Trends of Clinical Uses // Biology (Basel). 2021. Vol. 10, N 11. P. 1170. doi: 10.3390/biology10111170
- Rinke S., Metzger A., Ziebolz H. Multilayer Super-Translucent Zirconia for Chairside Fabrication of a Monolithic Posterior Crown // Case Rep Dent. 2022. Vol. 3, N 23. P. 4474227. doi: 10.1155/2022/4474227
- Morsy N., El Kateb M., Azer A., Fathalla S. Fit of monolithic multilayer zirconia fixed partial dentures fabricated by conventional versus digital impression: a clinical and laboratory investigations // Clin Oral Investig. 2021. Vol. 25, N 9. P. 5363–5373. doi: 10.1007/s00784-021-03845-4
- Zhang C., Zhu Y., Zhang Y., Jiang Y. Clinical esthetic comparison between monolithic high-translucency multilayer zirconia and traditional veneered zirconia for single implant restoration in maxillary esthetic areas: Prosthetic and patient- centered outcomes // J Dent Sci. 2022. Vol. 17, N 3. P. 1151–1159. doi: 10.1016/j.jds.2022.01.012
- Arce C., Park S., Lawson N. Multilayered translucent zirconia crowns // Inside Dentistry. 2018. Vol. 14, Iss. 4. Доступ по ссылке: https://www.aegisdentalnetwork.com/id/2018/04/multilayered-translucent-zirconia-crowns. Дата обращения: 09.04.2023. .
- Kwon S., McLaren E., Nejat A., Burgess J. Comparison of the mechanical properties of translucent zirconia and lithium disilicate // J Prosthet Dent. 2018. Vol. 120, N 1. P. 132–137. doi: 10.1016/j.prosdent.2017.08.004
- Michailova M., Elsayed A., Fabel G., et al. Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sintering // J Mech Behav Biomed Mater. 2020. Vol. 111. P. 103977. doi: 10.1016/j.jmbbm.2020.103977
- Tabatabaian F. Color Aspect of Monolithic Zirconia Restorations: A Review of the Literature // J Prosthodont. 2019. Vol. 28, N 3. P. 276–287, doi: 10.1111/jopr.12906
- Kontonasaki E., Rigos A., Ilia C., Istantsos T. Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance // Dent J. 2019. Vol. 7, N 3. P. 90. doi: 10.3390/dj7030090
- Ziceram zircon ceramics. Доступ по ссылке: https://zirconceramics.ru/wp-content/uploads/2021/11/ru-katalog-produkczii-ziceram-dlya-sajta.pdf. Дата обращения: 10.04.2023.