Effects of ZnO–B2O3 addition on sintering behaviors and microwave dielectric properties of Ba4Sm9.33Ti18O54 ceramics


Citar

Texto integral

Acesso aberto Acesso aberto
Acesso é fechado Acesso está concedido
Acesso é fechado Somente assinantes

Resumo

Effects of ZnO–B2O3 (ZB) addition on the densification, phase evolution and microwaves dielectric properties of Ba4Sm9.33Ti18O54 (BST) ceramics for low-temperature fired applications have been investigated. The sintering temperature of BST ceramics can be effectively lowered to about 1000°C with introduction of ZB. Tungsten bronze like single phase is observed in the BST ceramics with 0.5 and 1.0% ZB. However, Sm2Ti2O7 secondary phase appears when ZB addition reaches 2%, and Sm2Ti2O7 phase gradually increases with the increase ZB addition. Microwave dielectric properties of the present ceramics are strongly dependent on phase constitution and density. Optimal microwave dielectric properties of ε = 63.4, Qf = 2830 GHz, τf =–8.8 ppm/°C is obtained for BST ceramics with 1% ZB addition.

Sobre autores

S. Qin

Institute of Advanced Ceramics, College of Materials Science and Engineering

Email: brook76@163.com
República Popular da China, 2 Xueyuan Road, University Town, Fuzhou, 350108

X. Huang

Institute of Advanced Ceramics, College of Materials Science and Engineering

Email: brook76@163.com
República Popular da China, 2 Xueyuan Road, University Town, Fuzhou, 350108

X. Zheng

Institute of Advanced Ceramics, College of Materials Science and Engineering

Autor responsável pela correspondência
Email: brook76@163.com
República Popular da China, 2 Xueyuan Road, University Town, Fuzhou, 350108

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML

Declaração de direitos autorais © Pleiades Publishing, Ltd., 2016