Functionally graded ceramic material prepared by spark plasma sintering (SPS)


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

A procedure for preparing a functionally graded material in the high-temperature ceramic–SiC system with step composition variation profile is considered. Five-layer samples of a functionally graded material (layer arrangement: 100, 75, 50, 25, and 0 vol % high-temperature ceramic) were prepared by spark plasma sintering. No cracks and no delamination were observed in the samples after thermal cycling in an oxidizing atmosphere at 1400 and 1600°С. A study of the properties and heat resistance of the ceramic functionally graded material revealed its high quality at relatively low density; i.e., spark plasma sintering shows promise as a procedure for preparing this material.

作者简介

A. Kachaev

All-Russia Research Institute of Aviation Materials

Email: yulia.ananieva@gmail.com
俄罗斯联邦, ul. Radio 17, Moscow, 105005

Yu. Lebedeva

All-Russia Research Institute of Aviation Materials

编辑信件的主要联系方式.
Email: yulia.ananieva@gmail.com
俄罗斯联邦, ul. Radio 17, Moscow, 105005

I. Osin

All-Russia Research Institute of Aviation Materials

Email: yulia.ananieva@gmail.com
俄罗斯联邦, ul. Radio 17, Moscow, 105005

M. Vaganova

All-Russia Research Institute of Aviation Materials

Email: yulia.ananieva@gmail.com
俄罗斯联邦, ul. Radio 17, Moscow, 105005

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2017