Pouch-typed cell from Li-rich LiFePO4 prepared by low-cost carbothermal reduction method


如何引用文章

全文:

开放存取 开放存取
受限制的访问 ##reader.subscriptionAccessGranted##
受限制的访问 订阅存取

详细

Lithium iron phospho-olivine cathode material with optimized lithium amount for lithium-ion batteries was successfully prepared from low cost Fe2O3 as raw materials by thermal reduction method. The as-obtained material showed a reversible discharge capacity of 153.8 mAh g–1 in the voltage window of 2.0–4.2 V at half-cell level. The pouch-typed cells with prepared Li1.05FePO4 were assembled to investigate electrochemical performance at level of full-cell. The results show that the assembled pouch-typed full-cells present better rate capability and cycle life. The low-cost approach reported here firstly sheds light on application of mass production of olivinestructured LiFePO4 at level of full-cell.

作者简介

Zhanjun Guo

Institute of Environmental & Municipal Engineering

编辑信件的主要联系方式.
Email: guozj1973@163.com
中国, Zhengzhou, 450000

Zhiliang Chen

Yangzhou Research Academy of Energy and Material

Email: guozj1973@163.com
中国, Yangzhou, 225000

补充文件

附件文件
动作
1. JATS XML

版权所有 © Pleiades Publishing, Ltd., 2017