Email this article Synthesis and properties of zinc–nickel–carbon nanotube composite coatings
- Authors: Tseluikin V.N.1, Koreshkova A.A.1
-
Affiliations:
- Engels Institute of Technology
- Issue: Vol 89, No 6 (2016)
- Pages: 1027-1030
- Section: Brief Communications
- URL: https://journals.rcsi.science/1070-4272/article/view/214034
- DOI: https://doi.org/10.1134/S1070427216060288
- ID: 214034
Cite item
Open Access
Access granted
Subscription Access
Abstract
Composite electrochemical coatings modified with carbon nanotubes were produced on the basis of the zinc–nickel alloy. The functional properties (friction coefficient, protective capacity) of the composite coatings were studied in comparison with zinc–nickel alloys without a dispersed phase. It was found that, upon inclusion of carbon nanotubes particles into zinc–nickel deposits, their sliding friction coefficient decreases by a factor of 1.3–1.4 and the range of passive-state potentials becomes two times wider.
About the authors
V. N. Tseluikin
Engels Institute of Technology
Author for correspondence.
Email: tseluikin@mail.ru
Russian Federation, pl. Svobody 17, Engels, Saratov oblast, 413100
A. A. Koreshkova
Engels Institute of Technology
Email: tseluikin@mail.ru
Russian Federation, pl. Svobody 17, Engels, Saratov oblast, 413100
Supplementary files
