Enviar artigo por via de e-mail Applicability of Tractional Electric Motors
- Autores: Pautov G.A.1, Grechishnikov V.A.2, Yurasova O.I.1, Yurasov S.Y.1, Medvedeva E.M.1
-
Afiliações:
- Naberezhnye Chelny Institute, Kazan Federal University
- Stankin Moscow State Technical University
- Edição: Volume 38, Nº 12 (2018)
- Páginas: 1026-1028
- Seção: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/227598
- DOI: https://doi.org/10.3103/S1068798X18120134
- ID: 227598
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
The practicality of three armature designs for tractional electric motors (power 560–755 kW, tractional force 5326 kgf) is analyzed. The use of an armature shaft of variable (reinforced) cross section in place of the armature with a sleeve is proposed, and suggestions are made regarding the assembly of the bearings. Reinforcement of the working shaft by smoothing may be recommended.
Sobre autores
G. Pautov
Naberezhnye Chelny Institute, Kazan Federal University
Email: docfile@yandex.ru
Rússia, Kazan
V. Grechishnikov
Stankin Moscow State Technical University
Autor responsável pela correspondência
Email: ittf.stankin@gmail.com
Rússia, Moscow
O. Yurasova
Naberezhnye Chelny Institute, Kazan Federal University
Autor responsável pela correspondência
Email: yurasova-olya@yandex.ru
Rússia, Kazan
S. Yurasov
Naberezhnye Chelny Institute, Kazan Federal University
Autor responsável pela correspondência
Email: docfile@yandex.ru
Rússia, Kazan
E. Medvedeva
Naberezhnye Chelny Institute, Kazan Federal University
Email: docfile@yandex.ru
Rússia, Kazan
Arquivos suplementares
