Electrolytic Plasma Surface Polishing of Complex Components Produced by Selective Laser Melting

Resumo

The applicability of electrolytic plasma surface polishing to complex components produced by selective laser melting (SLM) is analyzed. By electrolytic plasma polishing by electrolyte spraying, the surface quality of components produced by SLM may be improved. This technology is found to decrease the surface roughness from R_a = 5.6 μm to 1.4 μm. The optimal pressure of the electrolyte jet is 0.02–0.05 MPa. At high pressures, the process becomes unstable. By electrolytic plasma polishing on the basis of electrolyte jets, uniform external and internal surface roughness of components produced by SLM may be ensured.