Email this article Temperature Control Channel in the Metal-Cutting Zone of a Lathe
- Authors: Reka N.G.1, Kourov G.N.1, Lyutov A.G.1
-
Affiliations:
- Ufa State Aviation-Engineering University
- Issue: Vol 36, No 2 (2016)
- Pages: 163-167
- Section: Article
- URL: https://journals.rcsi.science/1068-798X/article/view/226177
- DOI: https://doi.org/10.3103/S1068798X16020192
- ID: 226177
Cite item
Open Access
Access granted
Subscription Access
Abstract
Temperature regulation in the metal-cutting zone is considered. A method is proposed for monitoring the cutting temperature on the basis of a model dependence on the cutting parameters. A dynamic model of the relation between the cutting parameters and the temperature in the cutting zone is established. Models of the elements of the control channel for the cutting-zone temperature are developed. A dynamic model of the control channel for the temperature in the cutting zone is formulated. Recommendations are made regarding the practical application of the dynamic model.
About the authors
N. G. Reka
Ufa State Aviation-Engineering University
Email: Kourova.89@mail.ru
Russian Federation, Ufa, Bashkortostan Republic
G. N. Kourov
Ufa State Aviation-Engineering University
Author for correspondence.
Email: Kourova.89@mail.ru
Russian Federation, Ufa, Bashkortostan Republic
A. G. Lyutov
Ufa State Aviation-Engineering University
Email: Kourova.89@mail.ru
Russian Federation, Ufa, Bashkortostan Republic
Supplementary files
