| Шығарылым |
Атауы |
Файл |
| Том 36, № 5 (2016) |
Burnishing of holes with the application of a soft-metal antifrictional coating |
(Eng)
|
|
Sorokin V., Tanchuk S., Tudakova N., Mikheev A., Zotova V.
|
| Том 36, № 5 (2016) |
Turret head for numerically controlled machine tools with a pneumatic rotary drive for the tool disk |
(Eng)
|
|
Pini B., Maksimov Y., Popov A.
|
| Том 36, № 5 (2016) |
Automated design of machine-tool attachments |
(Eng)
|
|
Kul’ga K., Polovinkin A.
|
| Том 36, № 5 (2016) |
Solving parametric assembly problems |
(Eng)
|
|
Sorokin M., Koltunov I.
|
| Том 36, № 5 (2016) |
Flash formation in the pulsed laser cutting of thin-walled workpieces |
(Eng)
|
|
Kochergin S., Morgunov Y., Saushkin B.
|
| Том 36, № 5 (2016) |
Spark plasma sintering of cutting plates |
(Eng)
|
|
Yushin D., Smirnov A., Solis Pinargote N., Peretyagin P., Kuznetsov V., Torrecillas R.
|
| Том 36, № 5 (2016) |
Resultant cycloid trajectory in plane finishing |
(Eng)
|
|
Muratov K., Gashev E.
|
| Том 36, № 5 (2016) |
Hardening curves for materials with strain hardening |
(Eng)
|
|
Olenin L., Lekveishvili M.
|
| Том 36, № 5 (2016) |
Producing cylindrical gears by high-speed grinding |
(Eng)
|
|
Kalashnikov A., Morgunov Y., Kalashnikov P.
|
| Том 36, № 5 (2016) |
Simulation of multicutter milling with tool vibration |
(Eng)
|
|
Maksimov Y., Kuz’minskii D.
|
| Том 36, № 5 (2016) |
Analysis of the forces in the combined cutting and deforming of non-rigid shafts with tangential oscillations |
(Eng)
|
|
Maksimov Y., Ankin A., Chebyshev A.
|
| Том 36, № 4 (2016) |
Friction in the annular gaps between the control rods and housing of the BREST reactor |
(Eng)
|
|
Beznosov A., Bokova T., Makhov K., Shumilkov A., Albagachiev A., Drozdov Y.
|
| Том 36, № 4 (2016) |
Photometric determination of the dimensions of a standard object with basing errors |
(Eng)
|
|
Saninskii V., Gorsheneva M., Potekhin D., Silaev A.
|
| Том 36, № 4 (2016) |
Contact rigidity of parts with similar hardness |
(Eng)
|
|
Matlin M., Kazankina E., Kazankin V.
|
| Том 36, № 4 (2016) |
Dynamics of an indirect hydraulic pressure regulator with an elastic element |
(Eng)
|
|
Syrkin V., Treier V.
|
| Том 36, № 4 (2016) |
Dynamic hardening of structural polyurethanes |
(Eng)
|
|
Yakovlev S.
|
| Том 36, № 4 (2016) |
Shaping of discrete abrasive segments for plane face grinding |
(Eng)
|
|
Gusev V., Morozov A., Shvagirev P.
|
| Том 36, № 4 (2016) |
Nonuniform delivery rates from multicylinder pumps |
(Eng)
|
|
Shcherba V., Bolshtyanskii A., Kaigorodov S., Kuzeeva D.
|
| Том 36, № 4 (2016) |
Neural-network simulation of diesel operation under a nonsteady load |
(Eng)
|
|
Zubkov E., Khairullin A.
|
| Том 36, № 4 (2016) |
Frictional basalt-reinforced polymers based on polytetrafluoroethylene |
(Eng)
|
|
Okhlopkova A., Vasil’ev S., Petrova P., Gogoleva O.
|
| Том 36, № 4 (2016) |
Structural failure at low temperatures and stability diagnostics |
(Eng)
|
|
Kabaldin Y., Laptev I., Shatagina D., Anosova M., Zotova V.
|
| Том 36, № 4 (2016) |
Determining the stability regions in end milling |
(Eng)
|
|
Krasil’nikov A., Kravchenko K.
|
| Том 36, № 4 (2016) |
Influence of tool wear on the heat-flux distribution and temperature at the contact surfaces in the end milling of OT4 titanium alloy |
(Eng)
|
|
Evdokimov D., Skuratov D., Fedorov D.
|
| Том 36, № 4 (2016) |
Improving the precision of mechatronic robot drives |
(Eng)
|
|
Ilyukhin Y., Poduraev Y.
|
| Том 36, № 4 (2016) |
Indicators for linear measurements |
(Eng)
|
|
Voronichev P., Etingof M.
|
| Нәтижелер 991 - 901/925 |
<< < 32 33 34 35 36 37 38 39 40 > >>
|
