| 期 |
标题 |
文件 |
| 卷 38, 编号 12 (2018) |
Thermal Properties of Carbon Plastics |
(Eng)
|
|
Shafigullin L., Romanova N., Romanov V., Yurasov S., Sarimov D., Sokolova Y.
|
| 卷 38, 编号 11 (2018) |
Influence of Oscillatory Smoothing on the Residual Stress in Cylindrical Components |
(Eng)
|
|
Zaides S., Nguyen Van Hinh .
|
| 卷 38, 编号 11 (2018) |
Calculation and Experimental Methodic for Ensuring the Accuracy of the Reinforcement Angle of the Preform Made by Radial Braiding |
(Eng)
|
|
Samipour S., Batrakov V., Khaliulin V.
|
| 卷 38, 编号 11 (2018) |
Influence of the Lattice Parameter on the Low-Temperature Brittle Failure of Metals |
(Eng)
|
|
Kabaldin Y., Anosov M., Zhelonkin M., Golovin A.
|
| 卷 38, 编号 11 (2018) |
Effect of Plasma from a High-Frequency Low-Pressure Induction Discharge on the Corrosion Resistance of a Composite Based on Iron Powder |
(Eng)
|
|
Surkov V.
|
| 卷 38, 编号 11 (2018) |
Introducing Physical Nonlinearity in the Design of Aluminum-Alloy Vehicle Components |
(Eng)
|
|
Gel’ver I., Kolunin A.
|
| 卷 38, 编号 11 (2018) |
Airflow Bypass in Centrifugal Compressor and Operational Stability |
(Eng)
|
|
Lazarev E., Mashkov O., Martynov A., Pomaz A.
|
| 卷 38, 编号 11 (2018) |
SQP Optimization of a Planar Parallel Mechanism: Maximization of Effective Working Zone |
(Eng)
|
|
Zakharov M., Laryushkin P., Erastova K.
|
| 卷 38, 编号 11 (2018) |
Actual Contact Area in Pressure Couplings between Components of Different Hardness |
(Eng)
|
|
Matlin M., Kazankin V., Kazankina E., Mozgunova A.
|
| 卷 38, 编号 11 (2018) |
Production Unit for Fusible Metal Powders |
(Eng)
|
|
Ryazanov A., Pervyshin A.
|
| 卷 38, 编号 11 (2018) |
Gun-Drill Insertion in Drilling Deep Holes by Means of Multifunctional Machine Tools |
(Eng)
|
|
Kirsanov S., Tsygankov R.
|
| 卷 38, 编号 11 (2018) |
Compatibility of Components in Complex Systems |
(Eng)
|
|
Vasin S., Malikov A., Plakhotnikova E.
|
| 卷 38, 编号 11 (2018) |
Servicing and Repair of High-Performance Equipment |
(Eng)
|
|
Shmatkova A., Shmatkov V.
|
| 卷 38, 编号 11 (2018) |
Influence of Diffusional Surface Alloying on the Hardened-Layer Thickness for Gray-Iron Machine Parts |
(Eng)
|
|
Vasil’ev V., Ovsyannikov V., Nekrasov R., Tempel’ Y.
|
| 卷 38, 编号 11 (2018) |
Measuring System for Use in Radar-System Development |
(Eng)
|
|
Kanashchenkov A., Matveev A., Novikov S.
|
| 卷 38, 编号 11 (2018) |
Influence of Insert Configuration on the Product’s Surface Quality in Burnishing |
(Eng)
|
|
Smirnov A., Kuznetsov V.
|
| 卷 38, 编号 11 (2018) |
Surface Quality after High-Speed Grinding |
(Eng)
|
|
Rechenko D., Gritsenko B., Titov Y., Sergeev V., Nogaibekova G.
|
| 卷 38, 编号 11 (2018) |
Formalization of Automated Base Selection in the Design of Machining Processes |
(Eng)
|
|
Mitin E., Sul’din S., Okunev D.
|
| 卷 38, 编号 11 (2018) |
Mechatronic Chip-Disintegration System for Lathes |
(Eng)
|
|
Vinogradov M., Ignat’ev A., Sigitov E., Nasad T., Samoilova E., Kazinskii A., Klepova I., Zakharchenko M., Gavrilov A.
|
| 卷 38, 编号 11 (2018) |
Chip Formation in Turning by Cutting Inserts with Balls at the Front Surface |
(Eng)
|
|
Malikov A., Vasin S., Vasin L., Plakhotnikova E.
|
| 卷 38, 编号 11 (2018) |
Dynamic Characteristics of an Active Vibrocontact Monitoring System for Multipurpose Machine Tools |
(Eng)
|
|
Trompet G., Butakov S., Kazantseva N., Aleksandrov V., Bubkin A.
|
| 卷 38, 编号 10 (2018) |
Improving the Performance of Stamping Systems |
(Eng)
|
|
Gadalov V., Emel’yanov S., Vornacheva I., Makarova I., Filatov E.
|
| 卷 38, 编号 10 (2018) |
Smart Design of Driverless-Vehicle Routes in the Arctic and Far North |
(Eng)
|
|
Kabaldin Y., Shatagin D., Kiselev A., Zhelonkin M., Golovin A.
|
| 卷 38, 编号 10 (2018) |
Test Methods for Power Tools |
(Eng)
|
|
Yampol’skii D., Vanaev V.
|
| 卷 38, 编号 10 (2018) |
Eigenstrain Modeling of Laser–Shock Processing of Materials |
(Eng)
|
|
Sakhvadze G., Kavtaradze R., Nikabadze M.
|
| 301 - 325 的 991 信息 |
<< < 8 9 10 11 12 13 14 15 16 17 > >>
|
