Effect of the Physicochemical Properties of Refractory Compounds and Hard Alloys on Their Erosion in Electric Spark Alloying
- Авторы: Verkhoturov A.D., Ivanov V.I.1, Konevtsov L.A.2
-
Учреждения:
- Federal Scientific Agro-Engineering Center VIM
- Institute of Material Science of Khabarovsk Scientific Center
- Выпуск: Том 55, № 3 (2019)
- Страницы: 241-250
- Раздел: Article
- URL: https://journals.rcsi.science/1068-3755/article/view/231203
- DOI: https://doi.org/10.3103/S1068375519030165
- ID: 231203
Цитировать
Аннотация
This paper presents the results of a multiyear study of the dependence of the erosion of the anode in electric spark alloying (ESA) on the physicochemical properties of its material. This work has been performed using various devices, with different electric modes, using manual or mechanized treatment, and in various media. This article contains generalized data on the anode erosion of refractory compounds and hard alloys. It is shown that the refractory compounds’ erosion occurs at a substantial solid phase participation, whereas the correlation of the erosion value with thermo-physical properties for them is absent. Erosion resistance and the coefficient of the transfer of hard alloys at the ESA initial stage of treatment are both significantly larger than those of a relevant refractory compound, and they increase with the addition of bundle content to the alloy. The law of the additive property of erosion and its dependence on the content of the plastic bundle is not applicable to hard alloys. Porosity enhancements increase the erosion of the anode material.
Ключевые слова
Об авторах
A. Verkhoturov
Email: konevts@yandex.ru
V. Ivanov
Federal Scientific Agro-Engineering Center VIM
Автор, ответственный за переписку.
Email: tehnoinvest-vip@mail.ru
Россия, Moscow, 109428
L. Konevtsov
Institute of Material Science of Khabarovsk Scientific Center
Автор, ответственный за переписку.
Email: konevts@yandex.ru
Россия, Khabarovsk, 680042
Дополнительные файлы
