Electrolytic Codeposition of Nickel and Phosphorus from Methanesulfonate Electrolyte

Аннотация

The characteristics of Ni–P alloy electrodeposition from a methanesulfonate electrolyte have been investigated. It has been found that the phosphorus content of the alloy increases with increasing the concentration of sodium hypophosphite in the electrolyte and reducing the electrodeposition current density. A mechanism of codeposition of nickel and phosphorus has been suggested. It is shown that phosphorus was formed by electrochemical reduction of hypophosphite anions and their disproportionation at a catalytically active surface of a nickel cathode. It has been shown quantitatively that the most likely path for the formation of phosphorus through the electrochemical mechanism is the direct electrochemical reduction of a hypophosphite anion to atomic phosphorus. The rate of phosphorous formation from hypophosphite anions is dependent on the concentration of hydrogen ions in the near-electrode layer. Therefore, the phosphorus content of the coatings obtained from the methanesulfonate electrolyte is slightly decreased as compared with that from the sulfate electrolyte which exhibits higher buffering properties. It has been revealed that codeposition of nickel and phosphorus reduces the kinetic difficulties of electrochemical reduction of the nickel ions. This might be due to an increased near-electrode concentration of nickel hydroxyl complexes discharging at the cathode, which is the result of an increased near-electrode pH caused by the reactions involving hypophosphite anions and hydrogen ions.