Laser melt injection of austenitic cast iron Ch16D7GKh with titanium

详细

The results of studying the microstructure and microhardness of Ni-resist cast iron ChN16D7GKh after laser melt injection by means of introducing titanium particles into the melt are presented. The treatment was performed using a fiber laser with a beam focused into a spot 0.2 mm in diameter with a radiation power of 1 kW and the motion velocity of the laser beam of 10–40 mm/s. Titanium is dissolved in the cast-iron melt, and TiC particles are formed in the structure upon cooling. The coefficient of using the titanium powder increases as the fusion zone size increases and reaches 50% in the best case. A modified layer has a composite structure with a metallic matrix and a comparatively uniform distribution of titanium carbide particles. The microhardness of the modified zone is 600–700 HV. Its further growth is suppressed by the partial removal of carbon from the melt zone in the composition of red fume evolved in the process. Therefore, the Laves phase (TiFe₂) is formed instead of an increase in the TiC content upon increasing the titanium supply. The experimental data on the regularities of the weight loss caused by the substance removal from the melt zone depending on laser melting parameters are presented.