| 期 |
标题 |
文件 |
| 卷 58, 编号 6 (2017) |
Investigation into the Structure Formation and Properties of Materials in the Copper–Titanium Disilicide System |
(Eng)
|
|
Oglezneva S., Kachenyuk M., Ogleznev N.
|
| 卷 58, 编号 6 (2017) |
Tribological and Mechanical Properties of Al(Cu)/MWCNT Nanocomposite Prepared by Mechanical Alloying and Hot Extrusion |
(Eng)
|
|
Sabouni H., Sabooni S.
|
| 卷 58, 编号 5 (2017) |
Revisiting the structure of SiC–B4C–MedB2 systems and prospects for the development of composite ceramic materials based on them |
(Eng)
|
|
Ordan’yan S., Nesmelov D., Danilovich D., Udalov Y.
|
| 卷 58, 编号 5 (2017) |
Experimental investigations and thermodynamic calculations of the structural and phase composition in the Ti–Si–C system |
(Eng)
|
|
Popov V., Gorbachev I., Pasynkov A., Kachenyuk M., Somov O.
|
| 卷 58, 编号 4 (2017) |
Influence of alloying the TiC0.5N0.5 carbonitride with zirconium on an interaction mechanism with the Ni–Mo melt |
(Eng)
|
|
Zhilyaev V., Patrakov E.
|
| 卷 58, 编号 4 (2017) |
Ultrasonic effect on the penetration of the metallic melt into submicron particles and their agglomerates |
(Eng)
|
|
Kudryashova O., Eskin D., Khrustalyov A., Vorozhtsov S.
|
| 卷 58, 编号 4 (2017) |
Effect of various sintering methods on microstructures and mechanical properties of titanium and its alloy (Ti–Al–V–X): A review |
(Eng)
|
|
Rajadurai M., Raja Annamalai A.
|
| 卷 58, 编号 2 (2017) |
The use of PAP-2 aluminum powder to fabricate powder composites: Peculiarities of technology, structure, and physicomechanical properties of composites. Part 2. Study of composite properties and structure |
(Eng)
|
|
Ivanov D., Sitnikov A., Ivanov A., Shlyapin S.
|
| 卷 57, 编号 7 (2016) |
The influence of volume fraction of SiC particles on the properties of Al/SiCp nanocomposites produced by powder metallurgy with high energy ball milling |
(Eng)
|
|
Sharifi H., Borujeni H., Nasresfahani M.
|
| 卷 57, 编号 7 (2016) |
Application of PAP-2 aluminum powder to produce powdered composite materials: The features of technology, structure, and physicomechanical properties of composites. Part I. Process approaches providing the formation of composite materials and applied procedures for determining their physicomechanical properties |
(Eng)
|
|
Ivanov D., Sitnikov A., Ivanov A., Shlyapin S.
|
| 卷 57, 编号 6 (2016) |
Regularities of the contact interaction of double carbides (Ti1 –nMenIV, V)C with the Ni–Mo melt |
(Eng)
|
|
Zhilyaev V., Patrakov E.
|
| 卷 57, 编号 5 (2016) |
Kinetics and contact interaction mechanism of titanium carbonitride with the Ni–Mo melt |
(Eng)
|
|
Zhilyaev V., Patrakov E.
|
| 卷 57, 编号 5 (2016) |
Fine structure of interphase boundaries in hard alloys of the chromium carbide–titanium system |
(Eng)
|
|
Krokhalev A., Kharlamov V., Kuz’min S., Lysak V., Grinberg B.
|
| 卷 57, 编号 3 (2016) |
Regularities of the contact interaction of titanium carbide with Ni and Ni–Mo melts |
(Eng)
|
|
Zhilyaev V., Patrakov E., Fedorenko V.
|
| 卷 57, 编号 3 (2016) |
Prediction of effective elasticity moduli of porous composite materials |
(Eng)
|
|
Fedotov A.
|
| 卷 57, 编号 2 (2016) |
Influence of alloying titanium carbonitride by transition metals of groups IV–VI on the interaction with the nickel melt |
(Eng)
|
|
Zhilyaev V., Patrakov E.
|
| 卷 57, 编号 2 (2016) |
Investigation into physicomechanical properties and structure of the Al–Al2O3 composite material fabricated using mechanical treatment of the PAP-2 aluminum powder and reaction sintering of powder billets |
(Eng)
|
|
Ivanov D., Ivanov A., Shlyapin S.
|
| 卷 57, 编号 1 (2016) |
Regularities of reactions of titanium carbonitrides and oxycarbides with nickel |
(Eng)
|
|
Zhilyaev V., Patrakov E.
|
| 26 - 43 的 43 信息 |
<< < 1 2
|
