| 期 |
标题 |
文件 |
| 卷 60, 编号 6 (2019) |
Comparative Study of Coatings formed by Electrospark Alloying Using TiC–NiCr and TiC–NiCr– Eu2O3 Electrodes |
(Eng)
|
|
Kiryukhantsev-Korneev P., Sytchenko A., Levashov E.
|
| 卷 60, 编号 6 (2019) |
Phase Composition of D16 and V95 Deformable Aluminum Alloys with the Quantitative Assessment of Metal Burning at Various Stages of Development |
(Eng)
|
|
Vorob’ev R., Sorokina S., Evstifeeva V.
|
| 卷 60, 编号 5 (2019) |
High-Temperature Ion Nitriding Carbide Disposable Inserts of T15K6 Brand |
(Eng)
|
|
Bogoduhov S., Kozik E., Shvidenko E.
|
| 卷 60, 编号 5 (2019) |
Investigation into the Microstructure and Mechanical Properties in Submicrovolumes of LS591-A Brass |
(Eng)
|
|
Tkachuk G., Maltsev V., Chikova O.
|
| 卷 60, 编号 5 (2019) |
Thermal Stability of the Structure and Microhardness of the Al–0.05 vol % Al2O3 Nanocomposite Fabricated by Accumulative Roll Bonding |
(Eng)
|
|
Ivanov K., Glazkova E., Fortuna S., Kalashnikova T.
|
| 卷 60, 编号 5 (2019) |
Aluminum-Matrix Natural Composite Material Based on the Al–Ca–Ni–La–Fe System |
(Eng)
|
|
Akopyan T., Letyagin N., Samoshina M.
|
| 卷 60, 编号 5 (2019) |
Structure and Properties of Coarse-Grained WC–Co Alloys with an Especially Homogeneous Microstructure |
(Eng)
|
|
Avdeenko E., Zamulaeva E., Zaitsev A., Konyashin I., Levashov E.
|
| 卷 60, 编号 4 (2019) |
Heretophase Ceramics in the Hf–Si–Mo–B System Fabricated by the Combination of SHS and Hot Pressing Methods |
(Eng)
|
|
Pogozhev Y., Lemesheva M., Potanin A., Rupasov S., Vershinnikov V., Levashov E.
|
| 卷 60, 编号 3 (2019) |
Effect of Bismuth and Lead on the Phase Composition and Structure of the Al–5% Si–4% Cu–4% Sn Alloy |
(Eng)
|
|
Chervyakova K., Yakovleva A., Belov N., Shkalei I.
|
| 卷 60, 编号 3 (2019) |
Influence of a Magnetic Field on Structure Formation during the Crystallization and Physicomechanical Properties of Aluminum Alloys |
(Eng)
|
|
Vdovin K., Dubsky G., Deev V., Egorova L., Nefediev A., Prusov E.
|
| 卷 60, 编号 3 (2019) |
Influence of Ultrafine-Grained Structure on the Kinetics and Fatigue Failure Mechanism of VT6 Titanium Alloy |
(Eng)
|
|
Klevtsov G., Valiev R., Semenova I., Klevtsova N., Danilov V., Linderov M., Zasypkin S.
|
| 卷 60, 编号 2 (2019) |
Cold Sintering of Fe–Ag and Fe–Cu Nanocomposites by Consolidation in the High-Pressure Gradient |
(Eng)
|
|
Sharipova A., Psakhye S., Gotman I., Lerner M., Lozhkomoev A., Gutmanas E.
|
| 卷 60, 编号 2 (2019) |
Peculiarities of the Synthesis of High-Temperature TaSi2–SiC Ceramics Reinforced in situ by Discrete Silicon Carbide Nanofibers |
(Eng)
|
|
Vorotilo S., Polosova E., Levashov E.
|
| 卷 59, 编号 6 (2018) |
Study of the Structural Evolution of a Two-Phase Titanium Alloy during Thermodeformation Treatment |
(Eng)
|
|
Churyumov A., Spasenko V., Hazhina D., Mikhaylovskaya A., Solonin A., Prosviryakov A.
|
| 卷 59, 编号 5 (2018) |
Influence of Annealing at Various Temperatures on the Structure and Hardness of Amorphous Ribbons of the Al85Y8Ni5Co2 Alloy |
(Eng)
|
|
Igrevskaya A., Bazlov A., Tabachkova N., Louzguine D., Zolotorevskiy V.
|
| 卷 59, 编号 5 (2018) |
Development of Composite Bronzes Reinforced by Steel Dendrites |
(Eng)
|
|
Potekhin B., Khristolyubov A., Zhilyakov A.
|
| 卷 59, 编号 4 (2018) |
Structure and Magnetic Properties of WC–50% Co Model Alloys Containing TaC Additives |
(Eng)
|
|
Zaitsev A., Konyashin I., Avdeenko E., Svyndina N., Levashov E.
|
| 卷 59, 编号 4 (2018) |
Investigation into the Possibility of Fabricating Boraluminum Rolling of Increased Strength without Homogenization and Quenching |
(Eng)
|
|
Chervyakova K., Belov N., Samoshina M., Yakovlev A.
|
| 卷 59, 编号 4 (2018) |
Foundations of the Fabrication Technology of Wear-Resistant Coatings Made of Mixtures of Chromium Carbide Powders with a Metallic Binder by Explosive Pressing |
(Eng)
|
|
Krokhalev A., Kharlamov V., Kuzmin S., Lysak V.
|
| 卷 59, 编号 3 (2018) |
Influence of a Silicon Additive on Resistivity and Hardness of the Al–1% Fe–0.3% Zr Alloy |
(Eng)
|
|
Belov N., Korotkova N., Alabin A., Mishurov S.
|
| 卷 59, 编号 3 (2018) |
Use of Calcium in Alloys: From Modifying to Alloying |
(Eng)
|
|
Naumova E.
|
| 卷 59, 编号 2 (2018) |
Forecasting Mechanical Properties of Forgings of VT6 and VT3-1 Titanium Alloys Depending on the Chemical Composition and Structure |
(Eng)
|
|
Egorova Y., Davydenko L., Belova S., Chibisova E.
|
| 卷 59, 编号 2 (2018) |
Effect of Heat Treatment on the Structure and Properties of Sheet Semifinished Products Made of a Heat-Resistant Alloy Based on Titanium and Alloyed with Rare-Earth Metal |
(Eng)
|
|
Skvortsova S., Grushin I., Speranskiy K., Kavchenko E.
|
| 卷 59, 编号 2 (2018) |
Rheological Properties of the EP742-ID Alloy in the Context of Integrated Computational Materials Science and Engineering: Part I. Results of Experimental Investigations |
(Eng)
|
|
Nosov V., Kononov S., Perevozov A., Nesterov P., Shchugorev Y., Gladkov Y.
|
| 卷 59, 编号 2 (2018) |
Rheological Properties of the EP742-ID Alloy in the Context of Integrated Computational Materials Science and Engineering: Part II. Modeling the Compression Process of the Samples and Virtual Billets |
(Eng)
|
|
Nosov V., Kononov S., Perevozov A., Nesterov P., Shchugorev Y., Gladkov Y.
|
| 1 - 25 的 54 信息 |
1 2 3 > >>
|
