Polymer formulations for “dry” decontamination of the equipment and premises of nuclear power plants
- Autores: Voronik N.1, Toropova V.1
-
Afiliações:
- Joint Institute for Power and Nuclear Research—Sosny
- Edição: Volume 59, Nº 2 (2017)
- Páginas: 188-192
- Seção: Article
- URL: https://journals.rcsi.science/1066-3622/article/view/223841
- DOI: https://doi.org/10.1134/S1066362217020138
- ID: 223841
Citar
Resumo
Polymer composite formulations for decontamination were developed on the basis of a polyvinyl alcohol solution as a binder with active additives (HNO3, HBF4, 1-hydroxyethane-1,1-diphosphonic acid and its triammonium salt, and a synthetic detergent) and fillers (natural rottenstone; rottenstone modified with nickel and copper ferrocyanides; dolomite modified with nickel ferrocyanide; clinoptilolite modified with iron(III) and calcium chlorides, sodium phosphate, and potassium ferrocyanide; hydrolytic lignin). The developed polymer composite materials (pastes) exhibit high decontaminating ability (DF = 102–103) and low adhesion to the tested surfaces of stainless and carbon steels (including painted surfaces), plastic compound, self-leveling floors, and Teflon surface.
Palavras-chave
Sobre autores
N. Voronik
Joint Institute for Power and Nuclear Research—Sosny
Autor responsável pela correspondência
Email: ireplab06@mail.ru
Belarus, Minsk
V. Toropova
Joint Institute for Power and Nuclear Research—Sosny
Email: ireplab06@mail.ru
Belarus, Minsk