Properties of Hydrogen Sulfide Sensors Based on Thin Films of Tin Dioxide and Tungsten Trioxide

详细

The effect of hydrogen sulfide in the concentration range of 0–100 ppm on the characteristics of thin films of tin dioxide and tungsten trioxide obtained by the methods of magnetron deposition and modified with gold in the bulk and on the surface is studied. The impurities of antimony and nickel have been additionally introduced into the SnO₂ bulk. An optimal operating temperature of sensors 350°C was determined, at which there is a satisfactory correlation between the values of the response to H₂S and the response time. Degradation of the sensor characteristics is investigated in the long-term (~0.5–1.5 years) tests at operating temperature and periodic exposure to hydrogen sulfide, as well as after conservation of samples in the laboratory air. It is shown that for the fabrication of H₂S sensors, the most promising are thin nanocrystalline Au/WO₃:Au films characterized by a linear concentration dependence of the response and high stability of parameters during exploitation.