Мақаланы E-mail арқылы жіберу The formation of nanostructured carbon material on a ferrocene-containing polymer surface induced by a high-power ion beam
- Авторлар: Kovivchak V.1,2, Kryazhev Y.2,3, Zapevalova E.3
-
Мекемелер:
- Omsk State University
- Omsk Scientific Center, Siberian Branch
- Institute of Hydrocarbon Processing, Omsk Scientific Center, Siberian Branch
- Шығарылым: Том 42, № 2 (2016)
- Беттер: 153-155
- Бөлім: Article
- URL: https://journals.rcsi.science/1063-7850/article/view/197133
- DOI: https://doi.org/10.1134/S1063785016020103
- ID: 197133
Дәйексөз келтіру
Ашық рұқсат
Рұқсат берілді
Тек жазылушылар үшін
Аннотация
The surface morphology and the composition of polymer layers based on chlorinated polyvinylchloride with addition of ferrocene (up to 10% of the polymer mass) subject to the action of a nanosecond high-power ion beam are studied. It is demonstrated that carbon material in the form of nanofibers with an average diameter of 80 nm and a length of up to 10 μm is formed on a surface singly irradiated by such beam with a current density of ∼100 A/cm2. A possible mechanism of the observed phenomenon is discussed.
Негізгі сөздер
Авторлар туралы
V. Kovivchak
Omsk State University; Omsk Scientific Center, Siberian Branch
Хат алмасуға жауапты Автор.
Email: kvs@univer.omsk.su
Ресей, Omsk, 664077; Omsk, 644024
Yu. Kryazhev
Omsk Scientific Center, Siberian Branch; Institute of Hydrocarbon Processing, Omsk Scientific Center, Siberian Branch
Email: kvs@univer.omsk.su
Ресей, Omsk, 644024; Omsk, 634055
E. Zapevalova
Institute of Hydrocarbon Processing, Omsk Scientific Center, Siberian Branch
Email: kvs@univer.omsk.su
Ресей, Omsk, 634055
